User's Manual

C. Registration Roller Assembly
1. Detaching the Registration Clutch
1) Detach the connector cover or the lattice connector
2) Remove the clip ring q, and disconnect the connector w; then, detach the
registration clutch e.
Figure 5-727
2. Detaching the Upper Registration Roller
1) Detach the registration clutch. (See “1. Detaching the Registration Clutch on p. 5-
29.”)
2) Remove the spring q (front) and spring w (rear).
Figure 5-728
COPYRIGHT © 1997 CANON INC. CANON NP6218 REV. 0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 5 PICK-UP/FEEDING SYSTEM
5-31