User's Manual

COPYRIGHT © 1997 CANON INC. CANON NP6218 REV. 0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 6 FIXING SYSTEM
6-19
16) Remove the two screws @3, and detach the fixing film motor unit @4.
Figure 6-216
17) Remove the screw @5, and detach the cover @6.
18) Remove the screw @7, and disconnect the heater connector @8.
Caution:
If you are removing the screw @7, you must first make sure that the heater connector
has cooled.
The screw @7 is a special screw; take care not to lose it.
19) Remove the C-ring @9, and detach the bushing #0, leaving the fixing heater behind.
Figure 6-217
Caution:
Do not touch the surface of the heater.
@4
@3
@8
@9
#0
@6
@7
@5