User's Manual

B. Control Panel
1. Detaching the Control Panel
1) Detach the copyboard glass.
2) Detach the upper left cover.
3) Open the front door.
4) Pull the copier’s open/close lever to open the copier.
5) Detach the upper rear cover.
6) Detach the right cover.
7) Detach the left cover.
8) Remove the five screws q, and detach the inside cover w.
Figure 7-205
9) Disconnect the two connectors r (J309, J310) on the DC controller PCB; then,
detach the control panel t.
Figure 7-206 Figure 7-207
COPYRIGHT © 1997 CANON INC. CANON NP6218 REV. 0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
7-9
CHAPTER 7 EXTERNALS/AUXILIARY MECHANISMS