User's Manual

C. Fans

1. Detaching the Exhaust Fan

1) Open the front door.

2) Pull the copier’s open/close lever to open the copier.

3) Detach the DC controller PCB. (See “1. Detaching the DC Controller PCB” on p. 7-17.)

4) Remove the screw q at the copier’s rear, and remove the two screws w at the front.

Figure 7-208 Figure 7-209

5) Pull out the exhaust fan assembly e toward the front while supporting it.

Figure 7-210

6) Remove the four screws r, and detach the exhaust fan t.

Figure 7-211

1997 CANON INC. CANON NP6218 REV. 0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)

7-10

CHAPTER 7 EXTERNALS/AUXILIARY MECHANISMS

rrt