User's Manual

D. Main Motor/Main Drive Assembly
1. Detaching the Main Motor Unit
1) Detach the rear cover.
2) Disconnect the two connectors q, and remove the three screws w; then, detach the
main motor unit e.
Figure 7-212
2. Detaching the Main Drive Assembly
1) Open the front door.
2) Pull out the drum cartridge.
3) Detach the multifeeder unit.
4) Detach the rear cover.
5) Detach the main motor.
6) Remove the clip ring q, and disconnect the connector w; then, detach the
registration clutch e.
Figure 7-213
COPYRIGHT © 1997 CANON INC. CANON NP6218 REV. 0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
7-11
CHAPTER 7 EXTERNALS/AUXILIARY MECHANISMS