User's Manual

COPYRIGHT © 1997 CANON INC. CANON NP6218 REV. 0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
7-20
CHAPTER 7 EXTERNALS/AUXILIARY MECHANISMS
2. Points to Note When Handling the Composite Power Supply PCB
• Some capacitors used on the PCB may retain charges even when the copier remains
off. For this reason, you must take care never to short the terminals of the capacitor
whenever you have detached the PCB.
• Enter the settings (Nos. 315 through 318) recorded on the label attached to the
composite power supply (service part) in service mode. (See p. 10-103)