User's Manual

4) Insert the bend found at the rear of the heater into the heater mounting slit in the rear
side plate of the cassette feeding unit/pedestal (bottom holder).
Figure 8-603
5) Open the cover on the front of the cassette feeding unit/module, and fix the mounting
plate 2 in place to the front side plate with two screws (white; M3×6).
Figure 8-604
COPYRIGHT © 1997 CANON INC. CANON NP6218 REV. 0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
8-21
CHAPTER 8 INSTALLATION
Screws