User's Manual

10) Connect the connector on the relay harness with the copier’s connector.
Figure 8-609
11) Fix the relay harness in place to the rear side plate with the cord clamp.
• Cassette Feeding Module-A2
Figure 8-610
Caution:
Make sure that the relay harness is outside the area indicated by dashed lines to
prevent it from interfering with the feet of the cassette.
COPYRIGHT © 1997 CANON INC. CANON NP6218 REV. 0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
8-24
CHAPTER 8 INSTALLATION
Relay harness