User's Manual

6. Positioning the Change Solenoid
Make adjustments by loosening the two screws t so that the gear r butts against
the direction of b by the arm e when the steel core q of the solenoid is fully pushed in
the direction of B, i.e., when the E-ring comes into contact with the solenoid.
Figure 10-222
10-20
CHAPTER 10 TROUBLESHOOTING
COPYRIGHT © 1997 CANON INC. CANON NP6218 REV. 0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
t
q
w
e
r
AB
a
b