User's Manual

3. Positioning the Paper Guide Plate Cam (multifeeder)
Temporarily fix the screw with a hex nut of the spring clutch assembly in place; turn
the control ring. Make adjustments so that the hole in the cam and the hole in the
multifeeder drive unit match as indicated in Figure 10-233 when the claw of the control
ring is engaged with the solenoid; then, fix in place.
Figure 10-233
10-26
CHAPTER 10 TROUBLESHOOTING
COPYRIGHT © 1997 CANON INC. CANON NP6218 REV. 0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)