User's Manual

5) Attach the scanner cable fixing to the No. 1 mirror mount using two screws e (both
front and rear).
6) Tighten the screw on the pulley.
7) Detach the tool (FY9-3009).
Figure 3-414
6. Cleaning the Scanner No. 6 Mirror
1) Open the front cover.
2) Open the copier by operating the copier open/close lever.
3) Detach the dust-proofing glass q and dust-proof mirror cover w.
Figure 3-415
4) Clean the No. 6 mirror using a blower brush or lint-free paper moistened with alcohol.
COPYRIGHT © 1997 CANON INC. CANON NP6218 REV. 0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 3 EXPOSURE SYSTEM
3-17
e
(front) (rear)
q
w