User's Manual

6) Disconnect the two connectors y from the copier’s rear.
Figure 3-418
7) Remove the two screws u, and detach the lens drive unit i.
Figure 3-419
8) Remove the two screws, and disconnect the connector !0; then, detach the lens
motor !1.
Caution:
Disconnect the connector !0 first before removing the screw o; otherwise, the
harness and driver will come into contact with each other.
COPYRIGHT © 1997 CANON INC. CANON NP6218 REV. 0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 3 EXPOSURE SYSTEM
3-19
y
i
u