User's Manual

3. Adjusting the Position of the Change Solenoid
Make adjustments by loosening the two screws t so that the gear r is moved fully
in the direction of b by the arm e when the steel core q of the solenoid is fully pushed
in the direction of B by a finger, i.e., when the E-ring w comes into contact with the
solenoid.
Figure 3-422
COPYRIGHT © 1997 CANON INC. CANON NP6218 REV. 0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 3 EXPOSURE SYSTEM
3-21
a
b
B
A
5
44
2
1
3