Instruction manual
62
The image is recorded with the same file No., pixel count, and recording
quality in the same-numbered folder in both the CF card and SD card.
1
Select [BackUp].
¡Select the <
c
> tab.
¡Hold down the <
X
> button and
turn the <
5
> dial to select [BackUp].
Then let go of the button.
2
Select the desired setting.
¡Hold down the <
X> button and
turn the <
5> dial to select the setting.
Then let go of the button.
¡Either selection,
h or j, will
record the same image onto both
cards.
Difference between h and j
After image capture, you can have the image displayed from the CF
card or SD card. Selecting h will display the image in the CF card,
and j will display the image in the SD card.
Using Both Memory Cards for Image Recording (Backup)
¡ To make it easier to find back-up images, create a new folder and select
it.
¡ The number of remaining shots displayed on the top LCD panel will be
based on the memory card having less remaining capacity.
¡ In the back-up mode, a folder with the same number will be created
automatically in the CF card and SD card.
¡ If either one of the memory cards becomes full, shooting will not be
possible.
¡ You cannot move or copy images between the two cards.
F11]QCA.0,dk 40 ɚĘȸ ƒƐƐƓஉƑƑרƑƙý࣏ෙýعؽƓݰƒƔಠ