User Manual

[Finishing] Sheet

You can congure settings relating to nishing such as collating, stapling, etc.

Collate Group Offset

Rotate Hole Punch Staple

[Output Method]

Species a separating method when printing multiple copies.

[Collate]

Outputs the specied number of copies in page order.

[Group]

Outputs the specied number of copies with all pages having the same page number grouped together.

[Staple]

Staples the pages when outputting print data. Select staple position(s).

[On (Eco (Staple-Free))] crimps the paper without using staples.

The available staple positions vary depending on the output paper size, paper feed direction, and paper

source method.

[Hole Punch]

Outputs printed pages with holes for binding. This function can only be used when enabled at the device. The

type of punch holes you can select depends on the optional unit attached to the device.

[Offset]

Offsets each set of pages output.

[Specify Offset Interval: Every]

Outputs pages so that each specied number of pages is offset.

[Rotate]

Outputs each print job at a 90 degree angle relative to the one before and after it.

[Fold]

Species the type of fold when outputting pages folded into one of a variety of patterns.

Settings List