Product specifications

DC10 E, DC20 E
DISASSEMBLING
50
<Note on Reassembling>
(1) Attach the SD Cover as shown in the figure below.
(2) Attach the Center SW Knob and the Center SW Knob Dumper as shown in the figure below.
(3) Attach the Rear Key FPC Ass'y as shown in the figure below.
(4) Treat the Speaker Wire as shown in the figure.
(5) Tighten the Key Frame together with the Rear Key FPC at one place.
Fig. 47
Note on Reassembling (1)
Note on Reassembling (3)
Note on Reassembling (4)
Note on Reassembling (5)
Note on Reassembling (2)
Center SW Knob Dumper
Switch
Lever of Slide SW
Center SW Knob
Rear Key FPC Ass'y
Insert
Check the Slide SW
Knob by looking
through the hole.
Insert the Slide SW
lever into the concave
section of the Slide
SW Knob. Check if it
operates.
SD Cover
Key Frame
Align the characters (SET) with the
horizontal direction.
Rear Key
FPC Ass'y
Key Frame
Place the REAR
KEY FPC and
fix it with screws.
Dowel
Dowel
Dowel
Dowels
The speaker
mounting
reference :
±1 mm
Pass through the hook.
Pass through under
the rib.
The soldered
section on the
Speaker
should not
touch the
Key Frame.
Pass through the slit
of the rib.
Rib
Speaker
Key Frame
The shiny face should be on the SW side.