Product specifications

DC10 E, DC20 E

SERVICE MODE / ADJUSTMENT

3-4 Indication in Service Mode

Shown below are the indications in the service mode.

1. Indicates that the service mode is currently selected. (“SERV”)

2. MODE : Indicates the MODE currently selected. (RD/WR/ST)

3. Indicates for which block the command is specified. (MA,MD, CA, CD, etc.)

4. CS : Indicates the Chip Select currently specified. (0~F)

5. Function : Indicates the Function currently selected. (00~FF)

6. ADDR : Indicates the ADDRESS currently selected. (0000~FFFF)

7. DT : Indicate, in hexadecimal representation, the DATA currently being read or set. (00~FF)

8. Indicates the version of the MAIN program in the BACK END MI-COM.

9. Indicates the version of the FRONT END.

10. Indicates the version of the CCM MI-COM.

11. Indicates the version of the flash memory program mounted outside the CCM MI-COM.

12. Indicates the error rate.

13. Data Write status (00: READ mode, 04 : Write preparation, OC : Write execution)

14. ST : Adjustment status (02: During adjustment, 05: OK in adjustment result, 09: NG in adjustment result)*

* A numeric value to be indicated varies depending on the adjustment item concerned.

Fig. 6

5 6