Product specifications

DC10 E, DC20 E
SERVICE MODE / ADJUSTMENT
12
5. Adjustment Procedures
5-1 Adjustment Items in Part Replacement
After replacement of major parts, carry out adjustment referring to the table shown below. Note that the following table shows minimum
required adjustments to be performed after replacing any major part. In case that two or more parts have been replaced or any faulty
condition has occurred, take a proper adjustment procedure accordingly.
NOTE)
(1) Before turning on power to the main unit, prepare the tools necessary for a series of adjustment steps and make setting as required.
Thus, you can perform the adjustment items in succession without having to make preparation before each adjustment item.
(2) After turning on power to the main unit, carry out the adjustment items in the order indicated in the Service Manual. Accomplish
the adjustment items successively wherever possible.
(3) Regarding item 5-5 "CCD Section (2)", determine a timing point of execution with priority given to the internal camera temperature
(for details, refer to the description of internal camera temperature check). Note, however, that 5-6 "Camera Section" should be
taken after carrying out item 5-5 "CCD Section (2)". (Item 5-5 may be carried out before items 5-3 and 5-4.)
○
: Adjustment required
Camera system
Part name
No. Adjustment item
Lens
GYRO
PCB
CCD
PCB
MAIN
PCB
Adjustment setting
5-2 CCD Section (1) (DC20 E only)
5-2-1 Internal Camera Temperature Check (1)
○○
Product condit ion
5-2-2 Iris Adjustment (Coarse Adjustment)
○○
Product condit ion
5-2-3 Preparation for CCD Image Adjustment (1)
○○
Product condit ion
5-2-4 Preparation for CCD Image Adjustment (2)
○○
Product condit ion
5-2-5 Internal Camera Temperature Check (2)
○○
Product condit ion
5-2-6 CCD Image Adjustment (Low Temperature)
○○
Product condit ion
5-2-7
CCD Image Adjustment Result Check
(Low Temperature)
○○
Product condit ion
5-3 AF Section
5-3-1 VCM Adjustment
○○○
Product condit ion
5-3-2 CZ Automatic Adjustment
○○○
Product condit ion
5-3-3 Cam Correction (AUTO)
○○○
Product condit ion
5-4 IS Section
5-4-1 Gyro Offset Auto Adjustment
○○
Product condit ion
5-4-2 Data Writing
○○
Product condit ion
5-5 CCD Section (2) (DC20 E only)
5-5-1 Internal Camera Temperature Check (3)
○○
Product condit ion
5-5-2 CCD Image Adjustment (High Temperature)
○○
Product condit ion
5-5-3 CCD Image Adjustment Result Check
○○
Product condit ion