Product specifications

DC10 E, DC20 E

SERVICE MODE / ADJUSTMENT

5-7 Recorder Section Adjustment

Preparation)

(1) Carry out setup/check in the product state.

5-7-1 Playback error rate check

MODE Playing back DVD-R Reference disc PAL (DY9-1408-000)

SPEC. Error rate 3.3 × 10

-3

or less

Procedure)

(1) While playing back the reference disc, carry out error rate check referring to the table shown below.

Note)

* It takes 7 to 20 seconds to indicate an error rate, because it is calculated from large amount of data.

* To measure an error rate again, it is once required to stop the playback.

If the result of the error rate check is NG, perform recheck according to 2-3-1 “Flowchart for Playback Image Error Check” in

Service Hint.

STEP PROCEDURE MONITOR Microcomputer operation

SWP (AUTO) CS Function MD ADDR DT

1 1) Make the setting shown at right. 0 05 ST 0001 01

2) Perform storing.

↑↑

(press the PAUSE button.)

↑↑

↑00

Error rate indication.

Fig. 24

Error rate indication