Product specifications

DC10 E, DC20 E

DISASSEMBLING

(1) Attach the Lens Ring as shown in the figure below.

(2) Attach the Front Cover Unit as shown in the figure below.

(3) Attach the Front Sponge as shown in the figure below.

(4) Treat the flexible part as shown in the figure below.

Fig. 6

Note on Reassembling (2)Note on Reassembling (1)

Note on Reassembling (3)

Note on Reassembling (4)

Front

Sponge

Adjust at the Lens Section and insert two claws A

while turning them in the arrow direction.

Lens Ring

Engage

Claws A

Insert

CN106

CN701

SUB PCB

Lens Holder

IC2300

Be careful not to

place it onto the

IC2300.

Preliminarily fold up the

flexible cable to fit it to

the step difference

between the SUB PCB

and the MAIN PCB.

Insert the flexible cable to the depth of the Lens Holder and

MAIN PCB.

MAIN PCB

The openings should

not be covered.

Fold at the center