Product specifications

DC10 E, DC20 E

DISASSEMBLING

(4) Attach the Gasket and the ST Wire Protector (DC20 E only) to the position indicated in the figure below.

(5) Attach the Main Frame as shown in the figure below.

(6) Do not reuse the step screws (h × 4) securing the Main Frame, because its tip is applied with adhesive for the prevention of

loosening.

Fig. 22

Note on Reassembling (4)

Note on Reassembling (5)

Gasket

ST Wire Protector

Gasket

Main Frame

Gasket

Press the gasket.

Press the gasket in the

arrow direction.

Attachment

reference

Attachment

reference

Back side

DC20 E only

(DC20 E only)

TS Mech Recorder Ass'y

Ensure that the four gaskets are securely

pinched between the TS Mech Recorder

Ass'y Frame and the Main Frame.

Place the TS Mech Recorder Ass'y on the two gaskets other

than the one shown above, and pinch them between.