Product specifications

DC10 E, DC20 E

DISASSEMBLING

(1) Attach the Barrier Slide Holder as shown in the figure below.

(2) Attach the LED Radiator Gum to the position indicated in the figure below. (DC20 E only)

(3) The Back Barrier Plate should be mounted as shown in the figure. After mounting it, slide the Barrier Slide Holder to check if the

Barrier opens/closes smoothly.

(4) Attach the Blindfold Sheet to the position indicated in the figure below.

Fig. 24

Note on Reassembling (3) Note on Reassembling (4)

Note on Reassembling (1) Note on Reassembling (2)

Barrier Slide Holder Barrier Arm Ass'y

Mount the Barrier Slide Holder with its convex

section inserted to the Barrier Arm Ass'y hole.

LED Radiator Gum

FRONT FPC

Back Barrier Plate section

Blindfold Sheet

Adjust to

the dowel.

Pass the flexible

cable through it.

FRONT FPC

DC20 E only

Flexible cable

The edge part of the

flexible cable should

be positioned on the

Blindfold Sheet.

Adjust to

the step

difference.

Fold the FRONT

FPC, and attach

the Blindfold Sheet.