Product specifications

DC10 E, DC20 E

DISASSEMBLING

(1) Attach the Lens Barrier, Barrier Arm Ass'y, and Barrier Bottom Holder as shown in the figure below.

(2) Attach the Spring as shown in the figure below.

Front Cover Ass'y Rail section and side faces : Hanarl KS-39M (DY9-3053-000)

Fig. 28

Note on Reassembling (1)

Note on Reassembling (2)

Instruction for Supply

Barrier Bottom Holder

Front Cover Ass'y

Lens Barrier

Barrier Arm Ass'y

After mounting the Barrier Bottom

Holder, check if the dowels D and

E smoothly slide in the sliding

range with dowel C used as

supporting point.

Mount the Lens Barrier and the

Barrier Arm Ass'y using the groove

of section A of the Front Cover Ass'y.

Insert dowels C, D, E and F into the

holes and grooves of the Barrier

Bottom Holder, respectively.

Rib GRib G

Spring

Hook

Hang one side of the

spring on the hook.

Mount the spring by inserting its

tip into the hole of rib G.

Front Cover Ass'y

Rail section and

side faces

Hanarl : KS-39M

Dowel C

Dowel D

Dowel E

Dowel C

Dowel D

Dowel E

Dowel F