Product specifications

DC10 E, DC20 E

DISASSEMBLING

(1) Attach the Friction Plate as shown in the figure below.

(2) Attach the Disc Cover and the Front Grip Belt as shown in the figure below.

(3) Attach the Gap Sheet to the position indicated in the figure below.

(4) Incorporate the Flash Ass'y into the LC Cover and mount it into the Left Cover. Be sure to fasten two screws of the Flash Ass'y first

(DC20 E only).

Disc Cover Ass'y sliding surface: Hanarl KS-39M (DY9-3053-000)

Fig. 30

Note on Reassembling (1)

Note on Reassembling (2)

Note on Reassembling (4)

Note on Reassembling (3)

Instruction for Supply

Sliding part

Flash Ass'y

Insert the Disc Cover Ass'y Base

into the Front Grip Belt.

Disc Cover Ass'y

Friction Plate

Left Cover

LC Cover

Base section

Dowel

Open

Mount the Friction Plate in the Disc Cover Ass'y with

its dowel and hole fit into the groove and dowel, respectively.

For mounting the Left Cover, ensure that the

Disc Cover Ass'y base section should be open

as shown in the figure above.

groove

Fasten the

screws.

DC20 E only

Hanarl : KS-39M

Disc Cover

Ass'y Base

Front Grip Belt

Attachment

reference

Attachment

reference

Disc Cover Ass'y

Gap Sheet