Product specifications

DC10 E, DC20 E

DISASSEMBLING

(1) Attach the Open Knob and the Open Knob Spring as shown in the figure below.

(2) Attach the Lock Base Sheet to the position indicated in the figure below.

(3) Solder the SW FPC Ass'y to the Gear Motor and attach them as indicated in the figure below.

(4) Attach the Gap Sheet to the position indicated in the figure below.

Fig. 32

Note on Reassembling (1) Note on Reassembling (2)

Note on Reassembling (3)

Note on Reassembling (4)

D Cover Switch

Eject Switch

Dowel

Dowels

Align with the dowels at two places.

Dowels

Mount the Open

Knob Spring.

While compressing the Open

Knob Spring, insert the Open

Knob sections A and B into

the slit of Lock Ass'y.

Insert

Bend the

flexible cable.

Solder

Lock Ass'y

Open Knob

Lock Base Sheet

Lock Ass'y

Attachment

reference

Make them hit by

the standing sections.

AV Holder

Gap Sheet

Attach to the center

on the wall surface

of the AV Holder.