Product specifications

DC10 E, DC20 E

DISASSEMBLING

(1) Attach the LCD Ass'y as shown in the figure below.

(2) Attach the Hinge Plate as shown in the figure below.

(3) Attach the Right Sponge as shown in the figure below.

Fig. 35

Note on Reassembling (1) Note on Reassembling (2)

Note on Reassembling (3)

Hinge Gap Cover

Hinge Plate

Pass the flexible cable through

under the lower plate.

While folding the Right Sponge

as indicated in the figure, attach

it at the position shown in the

figure.

Right Sponge

Battery Terminal

LCD Hinge

Cable

With the LCD Ass'y closed, pass the LCD

Hinge Cable through the Battery Terminal,

and attach the Hinge Plate so that its holes

are aligned with the dowels.

Dowels

(3)

Attach the LCD Ass'y and while

holding the upper section of the

Hinge, attach two screws

(3) - k .