Instruction Manual for Macintosh

Before Downloading Images

Macintosh

Before Downloading Images

Connecting the Camcorder to a Computer

 Be sure to install the Digital Video Software before you connect the

camcorder to the computer.

 Make sure the camcorder is being powered using the power adapter before

connecting it to a computer.

 Connect the USB cable directly to one of the computer’s main USB ports.

The interface may not function correctly if the camcorder is connected via a

USB hub.

 The connection may not operate correctly if you are using other USB

devices, excluding USB mice or keyboards, at the same time. If this occurs,

disconnect the other devices from the computer and try reconnecting the

camcorder.

 Do not connect two or more camcorders to the same computer via the USB

interface. The connections may not operate correctly.

 Never allow the computer to go into standby (sleep) mode while a

camcorder is connected via the USB interface.

 Refer to your computer manual for the location of the computer’s USB ports.

 See your camcorder instruction manual for how to connect the camcorder to

the computer and how to change the media setting (MEDIA SEL. ) in the

SYSTEM SETUP menu.

Insert a disc or memory card containing images into the

camcorder.

Connect the power adapter to the camcorder.

Turn the power switch to ON and change the camcorder

mode to PLAY by sliding down the power switch.

Move the / to .

To download still images on the disc select DISC in the

MEDIA SEL. from the SYSTEM SETUP menu.

To download still images on the card select CARD in the

MEDIA SEL. from the SYSTEM SETUP menu.

Wait until the camcorder’s access indicator stops flashing.