Not For Resale – Free Download at http://www.joe-chan.
Not For Resale – Free Download at http://www.joe-chan.com/manuals INTRODUCTION the A-1's system accessories are integrated into its pulse-controlled, digital computer system so that you can enjoy AE flash and motorized AE photography. In the A-1, Canon finally offers you a multifunctional AE camera that actually gives you more creative freedom through more control. You will find that your A-1 has many unusual features.
Not For Resale – Free Download at http://www.joe-chan.
Not For Resale – Free Download at http://www.joe-chan.com/manuals TABLE OF CONTENTS Main Features ............................................................ 5 Pictorial Outline for General Use of the Camera ................................................................ 8 Setting the Camera for the Five AE Modes and Manual Override ................................... 10 Preliminary Preparations ......................................... 12 Handling the Lens ..............................................
Not For Resale – Free Download at http://www.joe-chan.com/manuals MAIN FEATURES Quality from the Inside Out Canon has extended its use of computers and automation from automatic production of the main parts to at least partial automation in all facets of production including processing, assembly and inspection. In this contribution to a new system of camera manufacture, Canon is able to offer greater precision at less expense.
Not For Resale – Free Download at http://www.joe-chan.com/manuals AE functions is also possible. Shutter priority AE is especially useful in action photography, aperture priority AE in still photography. The programmed AE mode, in which the camera controls both aperture and shutter speed for correct exposure, is good for general use and is the easiest mode for beginners.
Not For Resale – Free Download at http://www.joe-chan.com/manuals detachable action grip, its 120°-stroke film advance lever with a 30 stand-off, its eyepiece shutter and its shutter button lock (main switch). Wide Metering Range With its extensive film sensitivity range (ASA 6-12800) and 16 shutter speeds (1/1000-30 sec.), the A-1 offers a wide AE metering range from EV18 (f/16, 1/1000 sec.) all the way down to EV-2 (f/1.4, 8 sec.) with ASA 100 film and an f/1.4 speed lens.
Not For Resale – Free Download at http://www.joe-chan.com/manuals 1 Load the battery. 2 Turn the main switch to the “A” position and check the power level. 3 Load the film and advance it to the first frame. PICTORIAL OUTLINE FOR GENERAL USE OF THE CAMERA 7 8 Look into the viewfinder. Compose the picture and focus. Check the exposure.
Not For Resale – Free Download at http://www.joe-chan.com/manuals 4 Set the ASA film speed. 9 Press the shutter button gently. 5 Set the aperture ring of the lens to the “A” mark (for AE photography). 10 Advance the film to the next frame. 6 Select the AE mode. (Turn the AT dial). 11 Rewind the film after all frames are exposed.
Not For Resale – Free Download at http://www.joe-chan.com/manuals SETTING THE CAMERA FOR THE FIVE AE MODES AND MANUAL OVERRIDE Shutter Priority AE 1. Make sure the lens aperture ring is set to the “A” mark. 2. Switch the AE mode selector to TV. 3. Select a shutter speed by turning the AT dial. See pp. 34-36 for detailed explanation. Aperture Priority AE 1. Make sure the aperture ring of the lens is set to the “A” mark. 2. Switch the AE mode selector to Av. 3. Select an aperture by turning the AT dial.
Not For Resale – Free Download at http://www.joe-chan.com/manuals Stopped-down AE 1. Disengage the lens aperture ring from the “A” mark (necessary only on FD lens). 2. Fold and push in the stopdown lever. 3. Set the aperture by turning the lens aperture ring. See pp. 61-62 for detailed explanation. AE Flash 1. Insert the Speedlite 577G's or 533G's sensor unit or the 199A, 188A, 177A, 155A or 133A into the A-1's accessory shoe. 2. Set the ASA film speed on the flash. 3.
Not For Resale – Free Download at http://www.joe-chan.com/manuals Eyecup 4S This is an accessory eyecup which snaps into the eyepiece grooves. Its use is not mandatory, but viewing with it may be more comfortable, and it helps block extraneous light from entering the viewfinder. PRELIMINARY PREPARATIONS Neckstrap Thread the tips of the neckstrap through the corresponding rings on the camera so that the tips are on the inside. Then adjust the neckstrap to the length most comfortable for you.
Not For Resale – Free Download at http://www.joe-chan.com/manuals Semi-hard Case To protect the camera, particularly when carrying, it, insert it into its semi-hard case as indicated in the photo A. You can easily shoot pictures even with the camera in the semi-hard case by turning the top cover down. If you wish to remove the top cover, turn it down, slide it straight up in the direction of the arrow and pull it out as indicated in the photo B.
Not For Resale – Free Download at http://www.joe-chan.com/manuals Positioning Pin Automatic Aperture Lever Rear Dust Cap The rear dust cap must be removed before mounting the lens. tight. Operation with an FD lens which has a chrome Breech-lock mount ring or with an FL lens: Operation with an FD lens which lacks a chrome Breech-lock mount ring: Removal from Lens 1. Turn the lens' mount ring clockwise until it stops. 2. Pull the cap out. The rear dust cap for this type of lens has serrated edges.
Not For Resale – Free Download at http://www.joe-chan.com/manuals Lens Hood When shooting into bright light, light rays entering the lens may form defects on the image called ghost and flare. Attaching a hood onto the lens helps to prevent this. Bayonet-mount hoods are available as optional accessories for most Canon lenses. Please use only that hood which is specified for the lens concerned.
Not For Resale – Free Download at http://www.joe-chan.com/manuals Mounting on the Camera and Dismounting Pre-Mounting Checklist 1. Make sure the camera's stop-down lever is not locked for stopped-down metering (see p. 61). If it is, a red warning dot will appear beside the coupling lever inside the camera body. 2. Make sure the automatic aperture lever at the rear of an FD lens is not set for manual diaphragm control (see p. 80). 3.
Not For Resale – Free Download at http://www.joe-chan.com/manuals When removing a lens, take special care not to damage the protruding pins and levers on the rear. With the exception of the Fisheye 7.5mm lens, always put a lens down with the rear facing up. Whenever you mount an FD lens on the A-1, its maximum aperture is automatically transmitted to the camera's AE circuit.
Not For Resale – Free Download at http://www.joe-chan.
Not For Resale – Free Download at http://www.joe-chan.com/manuals Loading the Battery This camera will not function unless a battery is loaded. Use one brand-new silver oxide or alkaline-manganese battery as specified in the table below or an equivalent battery of another brand. Usable Batteries Silver Oxide Eveready (UCAR) Battery (6V) No. 544 JIS4G13 Mallory PX 28 Alkaline-manganese Eveready (UCAR) Battery (6V) No.
Not For Resale – Free Download at http://www.joe-chan.com/manuals Checking the Battery Life of the battery in normal use is approximately one year. Using the camera frequently at low shutter speeds, at the “B” setting or in extremely cold conditions takes more battery power and requires replacing the battery more often. The battery requires checking under the following circumstances: 1. When a new battery is loaded. 2. If the shutter will not function when the main switch is at “A”. 3.
Not For Resale – Free Download at http://www.joe-chan.com/manuals Getting a Feel for Your A-1 Now that the battery is loaded, your A-1 will function. Before loading the film or doing anything else, play with it a little. Operate the shutter button. and the film advance lever until they feel like natural extensions of your fingers. Shoot and develop at least one roll of film with a new camera before using it on a shooting expedition or on a trip to make sure you know how to operate it properly.
Not For Resale – Free Download at http://www.joe-chan.com/manuals Film Advance and Shutter Release At the base of the film advance lever is the main switch of the camera. When it is at the “L” (LOCK) setting, all active circuits are turned off and the shutter button is locked to prevent unintentional shutter release. This switch should always be in the “L” position to prevent battery consumption and film wastage when the camera is not in use, such as when it is in a camera case.
Not For Resale – Free Download at http://www.joe-chan.com/manuals Attaching a Cable Release A cable release is a device which, used in conjunction with a tripod, allows the shutter to be held open for long exposures without your ever having to touch either camera or shutter button directly. This is especially useful for reducing the chances of blurred images in copy work, photomacrography and photomicrography. The A-1 is provided with a socket for a cable release in the center of the shutter button.
Not For Resale – Free Download at http://www.joe-chan.
Not For Resale – Free Download at http://www.joe-chan.com/manuals Holding the Camera The best precaution in preventing camera shake is to press the shutter button gently. Never punch it. It is also helpful to hold the camera properly, not only for good image results but also for comfort and ease in handling.
Not For Resale – Free Download at http://www.joe-chan.com/manuals Film Loading The Canon A-1 accepts color or black and white film in standard 35mm cartridges. When loading and unloading film, avoid direct sunlight and take care not to touch the shutter curtain, the film trails or the pressure plate. To load the film, first fold out the rewind crank and sharply pull up the rewind knob. The camera's back cover will pop open.
Not For Resale – Free Download at http://www.joe-chan.com/manuals rewind crank clockwise to take up film slack, open the back cover and reload the film. The A-1 can also be loaded with bulk film in which case the tip of the film should be trimmed as illustrated below before it is loaded into the camera. Before loading the film, remove the plastic insert from the pressure plate, and throw it away.
Not For Resale – Free Download at http://www.joe-chan.com/manuals Setting the ASA Film Speed The ASA is a numerical rating of a film's sensitivity to light. The higher the ASA rating, the faster the film and the more sensitive it is to a given amount of light as compared to a film of a lower ASA rating. In other words, the higher the ASA rating, the less light you need to expose the film. When buying film, choose one with an ASA rating appropriate for the lighting conditions.
Not For Resale – Free Download at http://www.joe-chan.com/manuals The choice of film is an important part of photography, and you have a wide variety to choose from. Films differ in a number of ways including ASA rating, exposure latitude, color rendition and color temperature among other variables. Some, such as infrared film, require the use of certain filters. Depending on the type of film, a color temperature conversion filter may be necessary under certain lighting conditions.
Not For Resale – Free Download at http://www.joe-chan.com/manuals Memo Holder The back cover of this camera is provided with a memo holder. Once you have loaded the film and set the ASA, it is very useful to tear off the end of the film box and insert it into this memo holder as a constant reminder of the type of film in use. Add other information as you like. The Basics of Exposure This section contains some terms and definitions which will be used throughout this instruction booklet.
Not For Resale – Free Download at http://www.joe-chan.com/manuals through the lens. Each time you move from one f/stop to the next smaller f/stop (larger number), the amount of light allowed through is exactly halved. In effect, the amount of exposure itself is also halved. Using f/2 as a standard, the amount of light reaching the film will change according to f/stop as indicated below. On the A-1, aperture can be controlled either by turning the AT dial or the lens aperture ring to the desired f/stop.
Not For Resale – Free Download at http://www.joe-chan.com/manuals AE Photography AE photography means automatic exposure. The camera is selecting either shutter speed or aperture or both for you. The most obvious, unusual feature of this camera is the absence of the shutter speed dial which has been replaced by the AT dial. This dial allows you to set either shutter speed or aperture for any of five different AE modes.
Not For Resale – Free Download at http://www.joe-chan.com/manuals aperture and shutter speed in the programmed AE mode. This mode is helpful when your only goal is correct exposure and neither depth of field nor control of movement are very important in the picture. It is the easiest mode for the beginner. In stopped-down AE, you set the aperture manually on the lens aperture ring while the camera automatically selects a shutter speed for correct exposure.
Not For Resale – Free Download at http://www.joe-chan.com/manuals AE Lock Pin AE Mode Selector The AE mode selector has two possible settings, TV (time value) and Av (aperture value). When the AE mode selector is switched to TV, the camera is set for the shutter priority AE mode. You set the shutter speed and the camera selects the aperture. When switched to Av, the camera is set for aperture priority. Here you set the aperture, and the camera automatically selects the shutter speed.
Not For Resale – Free Download at http://www.joe-chan.com/manuals AT Dial This dial works in conjunction with the AE selector. When the AE selector is set at TV, it shows the shutter speed scale. When the AE selector is set to Av, it shows the aperture scale. To operate the AT dial, first slide down the AT dial guard which is designed to prevent accidental movement of the dial.
Not For Resale – Free Download at http://www.joe-chan.com/manuals button. AE photography is not possible at the “B” setting. The aperture must be set manually. Remember that it is very important to use a tripod and a cable release, preferably with a lock, in long exposures to reduce the chance of image blur. Also, since long exposures present a real drain on the battery, it may be wise to carry a spare. The A-1 has a hot shoe and PC outlet for an X-synch (flash synchronization) at 1/60 sec. (the position).
Not For Resale – Free Download at http://www.joe-chan.com/manuals f/1.8 as the aperture setting. In this case, the maximum aperture of the lens will be displayed in the viewfinder when you take an exposure preview regardless of the setting on the AT dial. On the other hand, if you have set an aperture on the AT dial smaller than the minimum aperture of the lens, the image will be exposed at the lens minimum aperture but the shutter speed will not be adjusted accordingly, resulting in over-exposure.
Not For Resale – Free Download at http://www.joe-chan.com/manuals Shutter priority AE FD 400mm f/4.5 S.S.C., 1/1000 sec.
Not For Resale – Free Download at http://www.joe-chan.com/manuals Shutter priority AE FD 50mm f/1.4, 1/30 sec.
Not For Resale – Free Download at http://www.joe-chan.com/manuals Shutter Priority vs. Aperture Priority Having now read how to control the camera for shutter priority and aperture priority AE photography, you might well wonder when it is best to use which mode. Basically, it depends upon what you want your photograph to portray. Shutter speeds are most effectively used to freeze or emphasize movement. The shutter priority AE mode is applicable to most photographic situations.
Not For Resale – Free Download at http://www.joe-chan.com/manuals This table does not necessarily apply when using a lens of a different focal length. If you are using a telephoto lens, for instance, any subject movement and the least bit of camera shake can have a magnified effect on image sharpness. For a telephoto it is necessary to use faster shutter speeds than with a standard lens under the same lighting conditions.
Not For Resale – Free Download at http://www.joe-chan.
Not For Resale – Free Download at http://www.joe-chan.com/manuals factors remaining the same). For example, comparing a 28mm lens with a 50mm lens at the same aperture and shooting distance, depth of field is deeper with the 28mm lens. (3) The greater the shooting distance, the deeper the depth of field (the other two factors remaining the same).
Not For Resale – Free Download at http://www.joe-chan.com/manuals Programmed AE FD 28-50mm f/3.
Not For Resale – Free Download at http://www.joe-chan.com/manuals the aperture for correct exposure. Of course, if it shifts to a shutter speed lower than 1/60 sec., it is advisable to use a tripod and a cable release or to switch to flash photography. The advantage of this particular mode is that it takes your mind completely off exposure so that you can concentrate on your subject.
Not For Resale – Free Download at http://www.joe-chan.com/manuals Meter Coupling Range When using the FD 50mm f/1.4 lens and ASA 100 film, the built-in exposure meter couples within a range of EV -2 (f/1.4 at 8 sec.) to EV 18 (f/16 at 1/1000 sec.) AE Range of Silicon Photocell at Various ASAs FD 50mm f/1.4 Lens AE Coupling Range At given film speeds, the built-in exposure meter couples with the aperture and shutter speed as indicated in the chart below.
Not For Resale – Free Download at http://www.joe-chan.com/manuals Metering at Low Light Levels With AE coupling all the way down to EV -2 (with ASA 100 film), the A-1 is capable of metering and producing a natural rendition of the light in very dim lighting conditions.
Not For Resale – Free Download at http://www.joe-chan.
Not For Resale – Free Download at http://www.joe-chan.com/manuals Out of Focus Viewfinder A less conspicuous, unusual feature of the A-1 is the fact that, unless you are taking a meter reading, the only thing you can see in the bright viewfinder is the viewing area. All other information is eliminated, leaving you undistracted freedom to focus and compose your picture.
Not For Resale – Free Download at http://www.joe-chan.com/manuals OPTIONAL VIEWING AIDS through the viewfinder after placing the dioptric lens over the eyepiece to be sure you have the best one. Dioptric Adjustment Lenses S The dioptric adjustment lens S is an accessory which slides into the grooves of the viewfinder eyepiece from above to correct individual eyesight. With them, eyeglass wearers can photograph without glasses.
Not For Resale – Free Download at http://www.joe-chan.com/manuals Magnifier S The Magnifier S inserts into the grooves of the viewfinder eyepiece with its adapter to give a 2.5X magnification of the center of the viewing area for precision focusing in close-up work and wide-angle photography. Its power is adjustable to your eyesight within a range of +4 to -4 diopters. Its adapter is hinged so that the magnifier can be swung upward from the eyepiece after focusing, leaving the entire screen image visible.
Not For Resale – Free Download at http://www.joe-chan.com/manuals Previewing the Exposure When you take a meter reading, the viewfinder information will be displayed in a digital readout directly below the viewing area. With the viewfinder display lever switched on, you can take a meter reading in any one of three ways: 1. Depress the shutter button halfway. 2. Press in the exposure preview switch. 3. Press the exposure memory switch.
Not For Resale – Free Download at http://www.joe-chan.com/manuals Cancelling the Viewfinder Display With the A-1, you have the option of turning off the viewfinder display altogether. This can be done simply by turning the viewfinder display lever to the white dot. Metering is taking place and the shutter can be released for a correctly exposed image even when the display is switched off, but it saves battery power and gives you absolute freedom to focus and compose the image undisturbed.
Not For Resale – Free Download at http://www.joe-chan.com/manuals Numerals and Characters Composing Digital Readout in Viewfinder Up to the first four digits from the left in the digital readout show shutter speed data ranging from 1/1000 sec. to 30 sec. All speeds from 1/2 sec. and faster will be displayed as a whole number as they are on the AT dial so that an indicated shutter speed of 500 in the digital readout stands for a shutter speed of 1/500 sec. All speeds from 1 sec.
Not For Resale – Free Download at http://www.joe-chan.com/manuals is set for flash photography while “buLb” replaces the shutter speed data when the AT dial shutter speed scale is set to “B”. “M” is also displayed at the “B” setting. The flashing “EEEE EE” appears to warn of error in the stopping-down process and will be explained in more detail later in this instruction booklet.
Not For Resale – Free Download at http://www.joe-chan.com/manuals shutter speed. If your lens has a smaller minimum aperture, exposure will be correct. Outside the Meter Coupling Range When the light level is so low that it would be outside the meter coupling range regardless of the shutter speed you set, the set shutter speed will flash on and off along with the aperture in the viewfinder.
Not For Resale – Free Download at http://www.joe-chan.com/manuals 3. In programmed AE mode Both the shutter speed LED and the aperture LED flash on and off simultaneously to warn you of overexposure as well as underexposure. In taking exposure readings, the shutter speed and aperture combination changes as they are programmed in the camera.
Not For Resale – Free Download at http://www.joe-chan.com/manuals Shutter Release Once you have focused, composed your picture and confirmed correct exposure, gently press the shutter button all the way down to set the shutter in motion. When the shutter is released, the exposure will be stored, so there is no problem in removing your finger from the shutter button even in the slow speed range.
Not For Resale – Free Download at http://www.joe-chan.com/manuals Frame Counter The frame counter of the A-1 is an additive type. It advances to the next number, indicating the number of frames already exposed, each time the film is wound. It will not advance higher than 38. The numbers 0, 20 and 36 are marked in orange, the latter two as a warning of the end or near-end of films having those numbers of frames.
Not For Resale – Free Download at http://www.joe-chan.
Not For Resale – Free Download at http://www.joe-chan.com/manuals Stopped-down AE Photography There are basically two cases which require stopped-down AE photography (unless you wish to operate in manual override). It is necessary when you use any lens which is not FD, such as FL or R lenses or the Reflex Lens 500mm f/8.
Not For Resale – Free Download at http://www.joe-chan.com/manuals data will be displayed in the viewfinder. Unless the shutter speed data is flashing on and off, simply press the shutter button for an accurately exposed image. Exposure warnings are exactly like those in aperture priority AE. Set the aperture ring to a larger aperture if a shutter speed of the slow range flashes on and off in the viewfinder. The shutter speed value that flashes to indicate underexposure depends on the ASA film speed.
Not For Resale – Free Download at http://www.joe-chan.com/manuals Stopped-down AE Photomicrography (butterfly wing), ASA 32 Stopped-down AE FD 50mm f/3.
Not For Resale – Free Download at http://www.joe-chan.com/manuals Warnings of Incorrect Operation in Stopped-down Photography button, you will notice that neither it nor the film advance lever will operate. What's more, this is when the “EEEE EE” mark will flash in the viewfinder whether the viewfinder display switch is turned off or not. This appears to be a distressing situation, but it is very easily corrected. Push the film advance lever into its retracted position close to the camera body.
Not For Resale – Free Download at http://www.joe-chan.com/manuals Manual Override You may have occasion to wish to cancel the A-1's AE capabilities to control exposure, both aperture and shutter speed, by yourself. This will be the case if you are using a separate exposure meter, if you wish to correct exposure in unusual lighting conditions or in flash photography, or if you want to control exposure for creative effects. With the A-1, this is a simple process.
Not For Resale – Free Download at http://www.joe-chan.com/manuals With an FD lens, if you set the AE selector to Av instead of TV while the lens is away from the “A ” mark, the digital readout will show the aperture you have set on the AT dial plus the corresponding camera-selected shutter speed as in aperture priority AE along with “M” for manual aperture setting.
Not For Resale – Free Download at http://www.joe-chan.com/manuals AE mode, it will not set the exposure until a split second before the shutter itself is actually released. Once you have completed these preparations, flick the eyepiece shutter lever to close the eyepiece shutter so that no light comes through the eyepiece to affect the exposure. Now press the shutter button and run into place if your purpose is to include yourself in the picture.
Not For Resale – Free Download at http://www.joe-chan.
Not For Resale – Free Download at http://www.joe-chan.com/manuals EXPOSURE COMPENSATION ject is not located in the central part of the You can, of course, make exposure corviewing screen. Exposure Compensation Dial rections by operating the camera manually, but the A-1 is also equipped with other One device for correcting exposure in the devices which allow you to correct the AE mode is the exposure compensation dial. exposure while in an AE mode.
Not For Resale – Free Download at http://www.joe-chan.com/manuals cate an exposure adjustment of only 1/3 f/stop, but your picture will be exposed in the 1/3 f/stop increment you set on the dial. Generally, exposure should be corrected whenever the high-key (light) or low-key area occupies more than half of the total viewing area. How much more or less exposure should be given depends on the lighting condition as roughly described below.
may be better to use the exposure memory switch as explained on the next page or manual override. The exposure compensation dial can also be used to correct exposure in multiple exposures as explained later.
Not For Resale – Free Download at http://www.joe-chan.com/manuals Exposure Memory Switch The A-1 also offers an exposure memory switch for correcting the exposure in the AE mode. Essentially, this switch assures correct exposure by exposing the picture for your subject no matter what the surroundings are. When you press in the exposure memory switch, it locks the exposure value (EV) for whatever you are metering.
Not For Resale – Free Download at http://www.joe-chan.com/manuals camera to a higher value. Usually this is done by multiplying the normal ASA rating by some multiple of two, say by two or four. In this case, the whole roll of film must be shot at the “pushed” ASA or you will have to sacrifice one or the other of a whole series of frames. Also, do not forget to inform your developing lab of the change or the whole film will be incorrectly developed. This is only an introduction to this technique.
Not For Resale – Free Download at http://www.joe-chan.com/manuals Multiple Exposures Making two or more exposures on the same frame is an exciting technique which is very simple to perform with the A-1. After making the first exposure, do not turn the film advance lever but return it to its retracted position close to the camera body. Switch the multiple exposure lever underneath the film advance lever to the left. A red dot will appear indicating that the camera is set for a multiple exposure.
Not For Resale – Free Download at http://www.joe-chan.com/manuals Multiple exposures are not possible when the Motor Drive MA or Power Winder A or A2 is mounted on the A-1 and in operation. They are possible even when these accessories are mounted if you switch them off and advance the film manually. There are some situations which seem to call for a multiple exposure but which are better handled in another way. One of these is recording multiple bursts of fireworks on the same frame.
Not For Resale – Free Download at http://www.joe-chan.com/manuals Film Plane Indicator This mark is engraved on the top of the camera beside the film rewind knob, just to the left of the pentaprism, to indicate the exact position of the film plane. It is not used in general photography, but it is helpful in close-up photography and photomacrography for obtaining the exact shooting distance from film to subject.
Not For Resale – Free Download at http://www.joe-chan.com/manuals make a focusing correction. Follow the detailed instructions of the film manufacturer. The position of the infrared index mark has been computed for the use of infrared film with peak sensitivity at 800nm (such as Kodak IR 135) and a red filter such as Wratten 87. Checking the Depth of Field There are two ways to find out what the depth of field is.
Not For Resale – Free Download at http://www.joe-chan.com/manuals field looking at the image through the viewfinder by pushing in the stop-down lever just as in stopped-down AE photography and setting the lens to the working aperture. This will probably be one of those occasions when you will release the stop-down lever and return the lens to “A” before taking a shot. You will have to operate the multiple exposure lever as explained earlier before the camera will properly operate.
Not For Resale – Free Download at http://www.joe-chan.com/manuals Aperture Signal Lever Full Aperture Signal Pin Lens Signal Coupling There are several levers and pins at the rear of an FD lens which transmit signals between the lens and the camera body. Usually it is not necessary to know what they are, but sometimes, when you must operate the aperture manually for non-coupled accessories for instance, it is. Just for your information, we include explanations of them here. 1.
Not For Resale – Free Download at http://www.joe-chan.com/manuals Unusable Lenses Out of the several series of Canon lenses, there are a few older individual lenses which cannot be used on the A-1. Do not attempt to mount the following five lenses: FL 19mm f/3.5 FL 58mm f/1.2 R 58mm f/1.2 R 100mm f/3.5 FLP 38mm f/2.8 3. Full Aperture Signal Pin This pin transmits the maximum aperture of the lens to the exposure meter to set the meter coupling range automatically. 4.
Not For Resale – Free Download at http://www.joe-chan.com/manuals All FD lenses which lack a Breechlock mount ring, with the exception of the Macro lenses, are set for manual diaphragm control as follows: Automatic Diaphragm Control When the A-1 is directly coupled with an FD lens, diaphragm control is totally automatic. Exposure metering is performed at full aperture whether the lens aperture ring is at the “A” mark or set to a specific aperture.
Not For Resale – Free Download at http://www.joe-chan.com/manuals All FD lenses with a chrome Breechlock mount ring and FD Macro lenses are set for manual diaphragm control as follows: When using a macrophoto coupler, the Macro Hood must also be mounted onto the rear of the lens. You may avoid setting the lens for manual diaphragm control when using manual accessories or a macrophoto coupler by attaching the Canon Macro Auto Ring and/ or Double Cable Release. 1.
Not For Resale – Free Download at http://www.joe-chan.com/manuals Flash AE FD 24mm f/2.
Not For Resale – Free Download at http://www.joe-chan.com/manuals FLASH PHOTOGRAPHY WITH THE A-1 AE Flash Photography (Full Autoflash Photography) There are seven special automatic flash units, the Canon Speedlites 577G, 533G, 199A, 188A, 177A, 155A and 133A, which make AE flash photography possible with the A-1. Just slip the Speedlite 577G's or 533G's sensor unit or the 199A, 188A, 177A, 155A or 133A into the accessory shoe, switch on the flash, focus and shoot.
Not For Resale – Free Download at http://www.joe-chan.com/manuals Of course, with the flash still on Auto you can set the aperture manually should you wish to use an FL lens. Even then, however, the camera will automatically switch to 1/60 sec. as soon as the Speedlite is ready for firing. These Speedlites employ a unique light sensing system, separate in the case of the 577G and 533G, which reduces excessive reflection from the central area to give better overall exposure.
Not For Resale – Free Download at http://www.joe-chan.com/manuals to work improperly or even possibly damage the camera itself. Exposure warnings are very similar to those in shutter priority AE. If you have set an auto working aperture larger than the maximum aperture of the lens, the maximum aperture of the lens will flash on and off to indicate underexposure. If you have set an auto working aperture smaller than f/16, the set auto working aperture will flash on and off.
Not For Resale – Free Download at http://www.joe-chan.com/manuals The digital readout will be the same as in AE flash control but will also include the “M” signal for manual aperture control. Though the set flash auto working aperture value is displayed in the readout, it is not automatically set as in AE flash control. The same aperture value as set on the flash must be manually set on the lens aperture ring. As in AE flash control, the shutter speed is automatically set at 1/60 sec.
Not For Resale – Free Download at http://www.joe-chan.com/manuals 2) Automatic Shutter Setting Autoflash 3) Manual Flash The “B” setting is useful in flash photography for lightening the subject's background. At this setting, the flash of the Speedlite synchronizes with the opening of the first shutter curtain. 5.
Not For Resale – Free Download at http://www.joe-chan.
Not For Resale – Free Download at http://www.joe-chan.com/manuals MOTORIZED FILM WINDING There remains one last mechanical operation in the A-1 that could possibly distract your attention from your subject: you have to wind the film. Canon has solved that problem for you too.
Not For Resale – Free Download at http://www.joe-chan.com/manuals DATA BACK A Within seconds, the A-1's back cover can be exchanged for the Data Back A, which, again, becomes an integral part of the camera's electronic system. As you press the shutter release, the day, month and year will be recorded clearly but unobtrusively in the lower right hand corner of every picture, i.e., unless you decide to leave it blank.
Not For Resale – Free Download at http://www.joe-chan.
Not For Resale – Free Download at http://www.joe-chan.com/manuals ACCESSORIES 1. Angle Finder A2 and B 2. Eyecup 4S 3. Magnifier S 4. Camera Holder F3 5. Macrophoto Coupler FL 52 and FL 58 6. Lens Hood BS-52 7. Microphoto Hood 8. Photomicro Unit F 9. Slide Duplicator 10. Handy Stand F 11. Canon Release 30 12. Canon Release 50 13. 52 mm filters 58 mm filters 14. 52-55 Step-up Ring 15. 58 mm Close-up Lenses (240,450) 16. 52 mm Close-up Lenses 17. Macrophoto Lens 20 mm f/3.5 18. Macrophoto Lens 35 mm f/2.
Not For Resale – Free Download at http://www.joe-chan.com/manuals 27. Copy Stand 4 28. Auto Bellows 29. Macro Auto Ring 30. Bellows FL 31. Extension Tube M Set 32. Manual Diaphragm Adapter 33. Extension Tube FD 15-U, FD 25-11 and FD 50-U 34. Extender FD 2x-A, Extender FD 2x-B 35. Dioptric Adjustment Lens S (10 kinds) 36. Speedlite 133A 37. Speedlite 155A 38. Speedlite 177A 39. Speedlite 188A 40. Speedlite 199A 41. Speedlite 533G 42. Speedlite 577G 43. Motor Drive MA 44. Battery Pack MA 45.
Not For Resale – Free Download at http://www.joe-chan.
Not For Resale – Free Download at http://www.joe-chan.com/manuals Proper Care of the Camera Your A-1 is a rugged, high-quality camera. It will work properly if operated and cared for properly. Never force anything. If you have a problem that is not answered in the instructions below, follow the advice of your nearest Canon serviceman. We recommend taking the A-1 to an authorized Canon service facility at least once every three years for a complete checkup. time, carefully check the operation of each part.
Not For Resale – Free Download at http://www.joe-chan.com/manuals is necessary, do not attempt to do it yourself but take it to an authorized Canon service facility. The film compartment also requires occasional cleaning with a blower brush to remove accumulated film dust particles which might scratch the film. When doing this, take special care NEVER to exert pressure on the shutter, the rail surfaces or the pressure plate. Salt and sand are your camera's worst enemies.
Not For Resale – Free Download at http://www.joe-chan.com/manuals SPECIFICATIONS Type: 35mm SLR (Single-Lens Reflex) camera with selective, electronically controlled AE (Automatic Exposure) and focal plane shutter. Format: 24 x 36mm. Photographic Modes: Six modes; including five AE modes: shutter priority AE, aperture priority AE, programmed AE, full AE flash photography with specified Canon electronic flashes, and stoppeddown AE; and manual override.
Not For Resale – Free Download at http://www.joe-chan.com/manuals AE Mechanism: Electronically controlled. Information input by means of AE mode selector and AT dial for full-aperture AE metering (FD lens at “A”) and stoppeddown AE metering. Employs three LSI's with I2L, one Linear LSI and one Bi-MOS IC for light metering. AE Mode Selection: By means of AE mode selector. Two settings: TV (Time value) for shutter priority AE, Av (Aperture value) for aperture priority AE.
Not For Resale – Free Download at http://www.joe-chan.com/manuals release. Pressing it halfway activates meter circuit, pressing it all the way sets shutter in operation. Can be locked by setting main switch to "L" to guard against accidental shutter release. With cable release socket. Power Source: One 6V silver oxide battery (Eveready No. 544, UCAR No. 544, JIS 4G13, Mallory PX28) or alkaline manganese battery (Eveready No. 537, UCAR No. 537). The battery lasts approximately one year under normal use.
Not For Resale – Free Download at http://www.joe-chan.com/manuals Frame Counter: Additive type. Counts back frames as film rewound. Automatically resets to "S" upon opening back cover. Does not advance during multiple exposures. Film Rewinding: By pressing rewind button and cranking rewind knob. Rewind button automatically resets when film advance lever turned. Other Safety Devices: Camera will not function when power level insufficient. Film winding impossible while shutter is in operation.
Not For Resale – Free Download at http://www.joe-chan.com/manuals For your own convenience you may want to use this form to fill in the serial numbers of your A-1 equipment for quick reference in the event of loss or theft. Name of the Camera: Canon A-1 Body Number: Lens: mm. 1: No. mm. mm. 1: No. Name: Address: Additional Accessories: Telephone Number: 1: No.
Not For Resale – Free Download at http://www.joe-chan.
Not For Resale – Free Download at http://www.joe-chan.com/manuals Aperture priority AE FD 100mm f/2.
Not For Resale – Free Download at http://www.joe-chan.