User manual

M-31
Working with Images in File Viewer Utility
M
3
Processing RAW Images
Adjusting the Sharpness
You can adjust the edge sharpness of the image.
Select the desired level from the [Sharpness] list box.
\ The selected level is applied to the
image.
Specifying the Color Space
Use the procedure below to change the color space for the image.
Select the desired setting from the [Colorspace] list box.
\ The selected setting is applied to
the image.
Copying the Processing Parameters for RAW Images
This process allows you to quickly and easily apply the processing parameters used for one
RAW image (such as the digital exposure compensation and white balance adjustment
settings) to other images.
1
Hold down the <control> key and click a RAW image that has
been processed and select [Copy Current Conditions] from the
menu that appears.
2
Hold down the <control> key and click the RAW image to which
you want to apply the parameters and select [Paste Current
Conditions] from the menu that appears.
\ The copied processing parameters are applied to the selected RAW image.
● You can apply the same processing parameters to multiple RAW images by copying
the processing parameters, selecting the RAW images (➞M-17) right-clicking one of
the selected images and then selecting [Paste Current Conditions] from the menu
that appears.
You cannot save processing parameters. When you exit File Viewer Utility, the copied
processing parameters are erased.