User manual

M-43

Working with Images in File Viewer Utility

Specifying the Camera Settings

Basic Settings tab sheet

This box shows the Camera’s

model name, Body ID and

Firmware Version.

These fields set the camera

owner and the date and time.

You can enter up to 31

characters in [Owner’s Name].

This box shows whether a CF

card is loaded in the camera

along with the available space

on the card and its total

capacity. You can also format

a CF card from this box.

Applies the specified settings,

closes the [Camera Settings] dialog

box and ends the procedure.

Cancels all the settings, restores

the parameters to their original

values and ends the procedure.

Applies the settings.

Formatting (initializing) a CF card erases all the data on the card. Because formatting

also erases protected images, you should check the data recorded on the card

carefully before proceeding.

Camera Settings dialog box

The battery level of the

camera battery is indicated by

[OK] or [LOW]. When the

camera is connected to a

household power source using

the DC Coupler Kit (optional),

[AC] is displayed.