User manual

M-53
Operating the Camera from Your Computer
M
4
Setting RemoteCapture
1
4
2
5
3
6
Detailed Settings
You can set shooting settings, such as White Balance and Exposure Compensation, from your
computer remotely.
● Before you make detailed settings, be sure to confirm that the camera is
ready for shooting. If the camera is not ready for shooting (the lens is not
attached, etc.), you cannot make some of the settings.
● The shooting settings cannot be specified if the camera’s shooting mode is
set to the Basic zone. Set the camera’s shooting mode to the Creative zone.
1
Display the Detailed Settings window.
● Click [ ] (the Detail setting button) in the Shooting window.
2
Click the [Shooting modes adjustment] tab.
\ The [Shooting modes adjustment] tab sheet appears.
3
Specify the settings and then close the Detailed Settings window.
● Click [ ] (the Hide detail setting button) in the Shooting window.
* The above window shows all the information at once. In actual use, only the
information needed is displayed.