User manual
W-6
Installing the Software
8
Proceed with the installation as directed by the on-screen
messages.
9
When installation has finished, restart your computer.
10
After the restart, remove the SOLUTION DISK from the CD-ROM
drive.
11
Plug the interface cable into the computer.
● Plug the cable into the USB port on
the computer.
● The location of the port differs
depending on your computer. Refer
to the User’s Manual for your
computer for details.
12
Plug the interface cable into your camera.
● Open the cover and plug the
interface cable connector into the
< > terminal with the < >
(USB) icon facing the front of the
camera.
USB port
Interface
cable
Interface
cable
DIGITAL terminal