User manual

W-45
Working with Images in File Viewer Utility
3
W
Specifying the Camera Settings
This box shows the
Camera’s model name,
Body ID and Firmware
Version.
These fields set the
camera owner and the
date and time. You can
enter up to 31 characters
in [Owner’s Name].
The battery level of the
camera battery is indicated
by [ ] or [ ].
When the camera is
connected to a household
power source using the DC
Coupler Kit (optional), [ ] is
displayed.
This box shows whether
a CF card is loaded in
the camera along with
the available space on
the card and its total
capacity. You can also
format a CF card from
this box.
Applies the specified
settings, closes the [Camera
Settings] dialog box and
ends the procedure.
Cancels all the settings, restores
the parameters to their original
values and ends the procedure.
Applies the settings.
Camera Settings dialog box
Formatting (initializing) a CF card erases all the data on the card. Because formatting
also erases protected images, you should check the data recorded on the card
carefully before proceeding.