Operation Manual

54
3
Sorting
Images
1
2
4
5
Introduction
Contents
Downloading
Images
Viewing
Images
Printing
Images
Editing
Images
Reference/
Index
6
Processing
Large Numbers
of RAW Images
7
Remote
Shooting
8
Specifying
Preferences
If the shooting result is dark or the contrast is low, you can use the Auto
Lighting Optimizer function to auto-correct the brightness and contrast,
and obtain a more favorable image.
You can also change the setting of the image shot with the camera’s
Auto Lighting Optimizer function.
This function also can be used for JPEG/TIFF images in addition to
RAW images.
* ALO stands for Auto Lighting Optimizer.
1
Checkmark the [Auto Lighting Optimizer] checkbox.
O For the image shot with the camera’s Auto Lighting Optimizer
function, the checkbox is already checked.
2
Change the setting according to your preferences.
¿ Auto correction is applied to the image to match the setting.
O For the image shot with the camera’s Auto Lighting Optimizer
function, the setting at the time of shooting is applied as the
default value.
O To cancel the Auto Lighting Optimizer, remove the check mark
from the checkbox.
Using the Auto Lighting Optimizer
Checkmark
Select from three
levels: Low/Standard/
Strong
O When [Highlight tone priority] is set to [Enable] on any supported
EOS camera other than the EOS-1D Mark IV or EOS 5D Mark II,
the Auto Lighting Optimizer cannot be used for RAW images.
O You cannot use the Auto Lighting Optimizer with multiple-
exposure RAW images created with the camera.
O When you apply Auto Lighting Optimizer to the RAW and JPEG
images shot simultaneously, the correction results of the two
images may differ.