Operation Manual

74
1
2
3
4
5
Introduction
Contents at
a Glance
Basic
Operation
Advanced
Operation
Advanced
Image Editing
and Printing
Editing
JPEG/TIFF
Images
Index
Processing
Large Numbers
of Images
Reference
5
Checkmark the [Setting] checkbox and adjust the
image.
O The [Setting] checkbox will be checkmarked if the image has the
Digital Lens Optimizer already applied. Remove the checkmark
and click the [Save] button to cancel the Digital Lens Optimizer.
O Images displayed in the [Digital Lens Optimizer] window are with
[Sharpness] and [Unsharp mask] effects applied by default. If you
checkmark the [Do not sharpen previews] checkbox, images are
displayed without [Sharpness] or [Unsharp mask] effects applied,
allowing you to check only the Digital Lens Optimizer effect.
O When applying the Digital Lens Optimizer, the effect of
[Sharpness] or [Unsharp mask] may become excessive. It is
recommended that you set [Sharpness] or [Strength] for [Unsharp
mask] for images to 0 before using the Digital Lens Optimizer.
Adjust [Sharpness] or [Unsharp mask] again after applying the
Digital Lens Optimizer to images.
O When the list box for selecting an extender is displayed, select
the extender attached at the time of shooting from the list box.
O Use the slider to adjust the Digital Lens Optimizer effect.
O When [MAX] is displayed for the Digital Lens Optimizer level, the
effect will remain the same even if you move the slider further to
the right.
O You can change the display position of the check window by
dragging the enlargement display position in the navigator
window.
O Even if you set shooting distance for a lens in this window, the
value indicated for shooting distance in the [Lens aberration
correction] window will not change.
O If no shooting distance information is saved to the image, the
shooting distance slider is set automatically to the right end at
infinity position and a [<!>] appears above the shooting distance
slider. The distance cannot be minutely adjusted by using the
slider for images shot with an EF-M lens. (The slider is not
displayed.)
O Images cannot be corrected for [Chromatic aberration] in [Lens
aberration correction] if the Digital Lens Optimizer has been
applied.
6
Click the [Save] button.
¿ The [Digital Lens Optimizer] window closes and correction
results are applied to the image in the edit window.
¿ Corrections made in the [Digital Lens Optimizer] window are also
displayed in the tool palette.
¿ In the main window, the [ ] mark is displayed on the image to
indicate that the Digital Lens Optimizer is applied (p.129).
O After clicking the [Save] button, the application of the corrections
to the image may take some time.
O The size of the image file will be larger after applying the Digital
Lens Optimizer.