PUB. DIM-462 DIGITAL VIDEO CAMCORDER ENGLISH Instruction Manual E CAMESCOPE ET LECTEUR VIDEO NUMERIQUES Mode d’emploi VIDEOCAMARA Y GRABADORA DIGITAL Manual de Instrucciones Mini PUB.
Important Usage Instructions WARNING: E TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK AND TO REDUCE ANNOYING INTERFERENCE, USE THE RECOMMENDED ACCESSORIES ONLY. COPYRIGHT WARNING: Unauthorized recording of copyrighted materials may infringe on the rights of copyright owners and be contrary to copyright laws. Digital Video Camcorder, GL2 systems Introduction This device complies with Part 15 of the FCC Rules.
IMPORTANT SAFETY INSTRUCTIONS In these safety instructions the word “product” refers to the Canon Digital Video Camcorder GL2 and all its accessories. 1. Read Instructions — All the safety and operating instructions should be read before the product is operated. 2. Retain Instructions — The safety and operating instructions should be retained for future reference. 3. Heed Warnings — All warnings on the product and in the operating instructions should be adhered to. 5.
15. Overloading — Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock. E 16. Objects and Liquid Entry — Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Be careful not to spill liquid of any kind onto the product. Introduction 17.
Operating Steps and Reference Guide Your camcorder is supplied with two manuals: the “Digital Video Camcorder GL2 Instruction Manual” and the “Digital Video Solution Disk Instruction Manual”.
Contents Introduction E Important Usage Instructions ........................ 2 Important Safety Instructions ........................ 3 Operating Steps and Reference Guide .......... 5 Thank You For Choosing a Canon ................ 8 Introducing the GL2 ...................................... 9 Introduction Preparations Finding Your Way Around the GL2.............. 10 Preparing the Camcorder ............................ 14 Powering the Camcorder ............................ 16 Loading a Cassette.......
Settings of the Still Images Recorded on a Memory Card .................................. 122 Preventing Accidental Erasure (Protect)...... 124 Marking a Still Image for Printing (Print Mark).............................................. 125 Erasing Still Images .................................. 127 Combining Images and Recording Them onto a Tape (Title Mix) ............................ 129 Copying Still Images from Memory Card to Tape ....................................................
Thank You For Choosing a Canon First, we’d like to thank you for purchasing this Canon camcorder. Its advanced technology makes it very easy to use — you will soon be making high-quality videos which will give you pleasure for years to come. E To get the most out of your new camcorder, we recommend that you read this manual thoroughly — there are many sophisticated features which will add to your recording enjoyment.
Introducing the GL2 3CCD System with Pixel Shift Technology The Canon GL2 has three CCDs, delivering outstanding picture quality, highly accurate color reproduction and a wide dynamic range with virtually no color noise. On top of that, Canon uses a broadcast technology called Pixel Shift to produce greater picture quality than that of camcorders using CCDs with almost twice the number of pixels.
Finding Your Way Around the GL2 E (play/pause) button (p. 87)/ Title Mix button (p. 130)/ SLIDE SHOW button (p. 121) (rewind) button (p. 87)/ CARD – button (p. 120) (stop) button (p. 87)/ INDEX SCREEN button (p. 121) PHOTO button (p. 48, 118) (fast forward) button (p. 87)/ CARD + button (p. 120) REC PAUSE button (p. 100,102) AUDIO DUB. button (p. 108) AV INSERT button (p. 105) Preparations START/STOP button (p. 35) Zoom controller (p. 42) Speaker (p. 89) Backup battery cover (p. 138) BATT.
E Carrying handle Zoom controller (p. 42) PHOTO button (p. 48, 118) Strap mount (p. 15) Lock lever (p. 35) Eyepiece adapter (p. 14) Stereo microphone (p. 56) TAPE/CARD switch (p. 20, 35) Start/stop button (p. 35) Lens hood locking screw (p. 14) Preparations Lens hood (p. 14) Viewfinder focusing lever (p. 14) DC terminal MIC terminal (p. 57, 108) u (LANC) terminal (p. 98) USB terminal (p. 134) (phones) terminal (p. 89) DV IN/OUT terminal (p.
E ND FILTER ON/OFF button (p. 47) FOCUS A/M button (p. 79) Focus ring (p. 79) Preparations Advanced accessory shoe (p. 68, 73-75) POWER switch (p. 35) REC (record) SEARCH button(p. 51)/ Record review button (p. 51) Tally lamp (p. 31) Remote sensor (p. 29) Strap mount (p. 15) Audio level indicator (p. 57) WHITE BALANCE W (set) button (p. 80) WHITE BALANCE SELECT button (p. 80) D.EFFECTS ON/OFF button (p. 63) D.EFFECTS SELECT button (p. 63) EXP (exposure) dial (p. 76) 12 Tripod socket (p.
E D.EFFECTS SELECT button (p. 63) Transmitter PHOTO button (p. 48, 118) MENU button (p. 21) Zoom buttons (p. 30, 42) START/STOP button (p. 35) START /STOP PHOTO SELF TIMER button (p. 71) ZOOM W SET button (p. 21) SELF TIMER MENU TV SCREEN button (p. 150) DATA CODE SET D.EFFECTS ON/OFF MIX BALANCE AUDIO MONITOR ST-1 AUDIO MONITOR button (p. 111) REC PAUSE – CARD + ST-2 SLIDESHOW REC PAUSE button (p. 100, 102) ZERO SET SEARCH MEMORY SELECT CARD buttons (p. 120) ZERO SET MEMORY button (p.
Preparing the Camcorder Attaching the Lens Hood E 1. Remove the lens cap. Preparations • When you purchase the GL2, the lens cap cord is attached to the middle of the Velcro grip belt. Open the Velcro and slide the lens cap cord to the position as shown in the illustration. 2. Align the hood to the lens with the Canon logo facing to the left. 3. Twist it into position (clockwise), so that the Canon logo is to the top. • You do not need to assert any pressure — screw the hood lightly into place. 4.
Adjusting the Grip Belt E • Adjust the length of the grip belt strap so that you can operate the start/stop button and zoom control effectively. Attaching the Shoulder Strap Preparations • For extra security and portability, attach the shoulder strap before using the camcorder. • Pass the ends through the strap mount and adjust the length as shown. • Be careful not to leave the viewfinder exposed to bright sunlight as it may melt. (The light is concentrated by the viewfinder lens.
Powering the Camcorder Before operating your camcorder, you will need to use the power adapter to: E provide power from a household power socket or charge a battery pack Notes: • The power adapter converts current from a household power socket (100–240 V AC, 50/60 Hz) to the DC current used by your camcorder. • If the adapter is used next to a TV, it may cause the TV to emit noise — move the adapter away from the TV or the antenna cable.
Charging and Attaching the Battery Pack E 1 2 3 4 5 Your battery pack was partially charged before it left the factory. It should have enough power for you to check that your camcorder is working properly. However, you must charge the battery pack fully if you want it to power the camcorder for more than a few minutes. • Make sure the DC coupler is not connected. • Align the triangle on the battery pack with the line on the power adapter. • Slide the battery across until it clicks into place. 2.
Loading a Cassette Use only videocassettes marked with the DV logo.* E . RST IS FI SE TH CLO * D logo is a trademark. Loading and Unloading 1. Attach a power source. Preparations 2. Slide the OPEN/EJECT button and release the cassette compartment cover. • Wait for the cassette compartment to open automatically. • The confirmation beep sounds when it is fully opened. 3. Load or unload the cassette. • Insert the cassette gently with the window facing outward.
Protecting Tapes from Accidental Erasure E REC SAVE REC SAVE Cassette Handling Precautions Preparations To protect your recording from accidental erasure, slide the tab on the cassette so that it exposes the hole. (This switch position is usually labeled SAVE or ERASE OFF.) If you load this cassette and put the camcorder in record pause mode ( 35), “THE TAPE IS SET FOR ERASURE PREVENTION” is displayed for approx. 4 seconds and then the v mark flashes in the display.
Using the Menus Many of the camcorder’s advanced functions are selected from menus which appear in the display. E There are 4 main menus: CAM. MENU Camera menu VCR MENU VCR menu C.CAM. MENU Card camera menu C.PLAY MENU Card play menu 2 CAM. MENU TAPE CAM. MENU + Preparations VCR MENU SEL. SETSET MENUCLOSE TAPE VCR MENU + C. CAM. MENU SEL. SETSET MENUCLOSE CARD + SEL. SETSET MENUCLOSE C. PLAY MENU CARD OPER. VCR SET UP DISP.
Selecting From the Menus E 2, 11 MENU TV SCREEN SET 3-10 1. Slide the POWER switch and the TAPE/CARD switch to the desired settings. 2. Press the MENU button to open the menu. • One of the main menus appears depending on the settings of the POWER switch and TAPE/CARD switch. 3. Pull the SELECT dial up and down to move the arrow to the desired submenu. • The submenu appears. 5. Pull the SELECT dial up and down to move the arrow to the desired function. 6. Press the SELECT dial in. Preparations 4.
List of Menus E Turn to the appropriate page for a detailed explanation of each function. 2 CAM. MENU Set the POWER switch to CAMERA and the TAPE/CARD switch to There are 7 submenus within the CAM. MENU. Preparations 1 2 3 4 5 6 7 8 Camera Set Up Submenu Custom Preset Submenu VCR Set Up Submenu Display Set Up Submenu System Submenu Custom Key Submenu Title Mix Submenu Close Main Menu TAPE . CAM. MENU 1 3 5 7 SEL. SETSET MENUCLOSE CAM. SET UP CSTM PRESET VCR SET UP DISP.
3 VCR Set Up Submenu !9 @0 @1 @2 @3 @4 Recording Mode .................................... Microphone ........................................... Microphone Attenuator ................. 57, Audio Mode .......................................... Power Save ............................................ Return E 37 56 108 56 36 SEL.
7 Title Mix Submenu E $5 Selecting a Title ................................... $6 Creating a Title .................................... $7 Return 130 129 TITLE MIX $5 $7 SEL. SETSET MENUCLOSE TITLE SELECT CREATE TITLE RETURN $6 2 VCR MENU Preparations PLAY Set the POWER switch to (VCR) and the TAPE/CARD switch to There are 4 submenus within the VCR MENU. 1 2 3 4 5 VCR Set Up Submenu Display Set Up Submenu System Submenu Custom Key Submenu Close Main Menu TAPE . VCR MENU 1 3 5 SEL.
3 System Submenu !8 !9 @0 @1 @2 @3 Wireless Controller................................. Tally Lamp.............................................. Beep ...................................................... Time Zone/Daylight Saving Time ............ Setting Date and Time .......................... Return E 30 31 39 32 34 SEL. SETSET MENUCLOSE WL. REMOTE••• 1 TALLY LAMP••ON BEEP••••••••ON T. ZONE/DST••––– D/TIME SET••–––. ––, –––– ––:––:–– –– RETURN @3 SEL.
2 Custom Preset Submenu E o !0 !1 !2 !3 Color Gain ............................................. Color Phase ........................................... Sharpness .............................................. Setup Level ............................................ Return 83 83 83 84 CSTM PRESET o !1 !3 SEL. SETSET MENUCLOSE + R + + COLOR GAIN••– COLOR PHASE•G SHARPNESS•••– SETUP LEVEL•– RETURN !0 !2 3 Card Set Up Submenu Preparations !4 !5 !6 !7 !8 Image Quality ..............................
6 Custom Key Submenu #2 Custom Key ........................................... #3 Return E 58 SEL. SETSET MENUCLOSE CUSTOM KEY•ZEBRA RETURN CUSTOM KEY #2 #3 2 C. PLAY MENU PLAY Set the POWER switch to (VCR) and the TAPE/CARD switch to There are 5 submenus within the C. PLAY MENU. Card Operation Submenu VCR Set Up Submenu Display Set Up Submenu System Submenu Custom Key Submenu Close Main Menu . C. PLAY MENU 1 3 5 SEL. SETSET MENUCLOSE CARD OPER. VCR SET UP DISP.
2 VCR Set Up Submenu E !0 Recording Mode .................................... !1 Return 37 VCR SET UP !0 SEL. SETSET MENUCLOSE REC MODE••••SP RETURN !1 3 Display Set Up Submenu Preparations !2 !3 !4 !5 !6 !7 !8 LCD Brightness ...................................... 44 Viewfinder Brightness ............................ 44 Displays ............................................... 150 Selecting Date/Time ............................... 90 Custom Key Display ...............................
Using the Wireless Controller/Tally Lamp The supplied wireless controller can operate the camcorder from a distance of up to 16 feet (5 m). Point it at the camcorder’s remote sensor while you press the buttons. The tally lamp lights up to let you know that the camcorder is in range and responding to your commands.
When Operating 2 Canon DV Camcorders (Remote Sensor Mode) E To prevent interference from other Canon wireless controllers being used nearby, there are 2 remote sensor modes and an off setting. The wireless controller and the camcorder have to be set to the same mode in order to be compatible. ZOOM W T REMOTE SET The wireless controller and the camcorder have been preset to mode 1. If you change the mode on the camcorder, be sure to change the mode on the wireless controller to the same mode.
Turning Off the Tally Lamp E The tally lamp lets you know that the camcorder is recording. However, its flashing may be reflected into the lens during close-up recording, or when recording through glass. You may therefore decide to turn it off. TAPE + CAMERA SYSTEM ( , TAPE + PLAY (VCR) , CARD + PLAY (VCR) TALLY LAMP•• ON 20) 1. Open the menu and select TALLY LAMP.
Setting the Date and Time E The date and/ time display forms part of the data code. You can choose to display or hide it during playback ( 90). Set the date and time display when you first start using your camcorder. Install the backup battery before you begin ( 138). • Before you start setting the date and time, select your home time zone from the menu.
E 16 1 19 18 24 20 4 2 3 17 6 7 10 9 15 8 5 21 23 14 12 22 11 13 14 15 16 17 18 19 20 21 22 23 24 No. Time zone 2 3 4 5 6 7 8 9 10 11 12 13 No. Time zone WELLGTN (Wellington) SAMOA HONOLU. (Honolulu) ANCHOR. (Anchorage) L.A. (Los Angeles) DENVER CHICAGO N.Y. (New York) CARACAS RIO (Rio de Janeiro) FERNAN. (Fernando de Noronha) AZORES Preparations LONDON PARIS CAIRO MOSCOW DUBAI KARACHI DACCA BANGKOK H.
Setting the Clock E After you set the date and time, the date/time and home time zone will be displayed for about 4 seconds each time you turn the power on (in TAPE CAMERA and CARD CAMERA mode). TAPE + CAMERA , TAPE + SYSTEM ( PLAY (VCR) , CARD + CAMERA , CARD + PLAY (VCR) D/TIME SET•• JAN.1,2002 12:00 AM 20) 1. Press the MENU button. • The main menu appears. 2. Pull the SELECT dial up or down, select SYSTEM and press the SELECT dial in. • The SYSTEM submenu menu appears. 3.
Basic Recording 1CARD 1 4 STANDBY LOCK TAPE E START STOP 3 STANDBY LOCK 2 Before You Start Recording • • • • • • Attach a power source ( 16). Load a cassette ( 18). Fasten the grip belt ( 15). Attach the lens hood ( 14). Choose the display: viewfinder ( 14) or LCD screen ( Adjust the viewfinder or the LCD screen. 43). You may also want to install the backup battery ( 138) in order to set the date and time display ( 32). For setting the movie mode, see “Selecting the Movie Mode” ( 50). 1.
Using the STANDBY lever E As long as the POWER switch is set to CAMERA, you can use the STANDBY lever to turn the camcorder on and off. This saves battery power and prevents accidental operation of the start/stop button. Turn the STANDBY lever to LOCK or STANDBY to enter/leave the standby mode. The Power Save Function The camcorder automatically turns off if you leave it in record pause mode for more than 5 minutes to protect tape and video heads.
Changing the Recording Mode (SP/LP) E You can record and play back a tape in SP (standard play) and LP (long play) modes. LP extends the tape usage by 1.5 times. You cannot add sound (audio dubbing) or images (AV insert) to a tape that has been recorded in LP mode. If you plan to use either of these functions later, record in SP mode. TAPE + CAMERA , TAPE + VCR SET UP ( PLAY (VCR) , CARD + CAMERA REC MODE•••• SP 20) To change to LP mode, open the menu and select VCR SET UP.
The 16:9 guides allows you to view the 16:9 wide screen composition while in the standard 4:3 aspect ratio. The 16:9 guides will not be superimposed on your recordings. E TAPE + CAMERA , DISP.SET UP ( TAPE + PLAY (VCR) 16:9GUIDES•• OFF 20) 1. Open the menu and select DISP. SET UP. 2. Select 16:9 GUIDES, set it to ON and close the menu. Notes: • “16:9” is shown in the display when you turn the 16:9 effect on.
Confirmation/Warning beeps E The camcorder’s short operation confirmation beeps are indicated by ` in the illustrations. Beeps sound upon certain camcorder operations such as when you turn the camcorder on, during the self-timer countdown, right before the camcorder’s automatic shut-off, and also upon any unusual condition of the camcorder. Beeps are not recorded on the tape.
Tips for Making Better Videos Holding the Camcorder E For maximum stability, grip the camcorder in your right hand and keep your right elbow pressed against your body. If necessary support the camcorder with your left hand. With practice, you will be able to operate the controls by touch, without taking your eye off the action.
Composition E The most important element in the scene does not necessarily have to be centered. For a more interesting picture, try to position your subject slightly to one side. Leave some space on the side of the frame that the subject is facing or moving towards. Do not cut off the top of the subject’s head, and do not cut people off at the neck, hips or knees (move a little bit above or below). Watch out for distracting objects in the background.
Zooming T Zoom in E ZOOM W Zoom out W W T T This camcorder is equipped with 20× optical zoom and 100× digital zoom. Optical zoom and digital zoom can be operated from either the side grip, the camcorder handle or the wireless controller. • Digital zoom cannot be used in CARD CAMERA mode. 20× Optical Zoom Press the zoom control towards W to zoom out to wide-angle. Press it towards T to zoom in to telephoto.
Using the LCD Screen Opening the LCD Screen E Push the LCD panel OPEN button and open the panel by pulling it away from the camcorder. This automatically switches the LCD screen on and the viewfinder off. When you close the LCD panel, the LCD screen automatically switches off and the viewfinder switches back on. Changing the Angle of the LCD Screen First open out the LCD panel at a right angle (90°) to the camcorder.
Adjusting the Brightness of the Display E You can adjust the brightness of the LCD screen and the viewfinder independently. TAPE + CAMERA , TAPE + DISP. SET UP ( PLAY (VCR) , + CARD LCD BRIGHT••– + EVF BRIGHT••– + CAMERA , CARD + PLAY (VCR) 20) 1. Open the menu and select DISP. SET UP. 2. Select LCD BRIGHT or EVF BRIGHT and adjust the brightness. • Pull the SELECT dial up to make the display brighter, and down to make it darker. 3. Close the menu.
To turn the mirror mode off, open the menu and select DISP.SET UP. E Then select MIRROR, set it to OFF and close the menu. • LCD MIRROR ON: The picture appears reversed like in a mirror. • LCD MIRROR OFF: The picture appears the same as the recording. • If you turn the LCD MIRROR ON, the recording itself is unaffected.
Turning the Optical Image Stabilizer Off E With most camcorders, even the slightest hand movements will be noticeable during telephoto recording. However, the GL2’s Optical Image Stabilizer allows you to obtain steady recordings even at high magnification. Unlike electronic image stabilizers, it causes no loss of picture quality. The Optical Image Stabilizer can compensate for a wide range of camcorder movement — you can record stable images even if you are shooting from a moving car.
Using the ND Filter E ND FILTER ON/OFF On bright days or when recording very bright scenes, despite the iris being at its smallest aperture, blurring of the image may occur. If this happens, using the ND filter should remove this problem. Turn the ND filter on by pressing the ND FILTER ON/OFF button. • ND is shown continuously in the display while the ND filter is turned on. – ND ON flashes in the display to advise you to switch the ND filter on.
Recording Still Images onto a Tape For recording still images on a memory card, see p. 118. E PHOTO You can record still images like photographs. The camcorder records the picture and sound to tape for several seconds. The exposure is automatically adjusted. Starting your shooting with a still image makes it easy to find the beginning again later with the Photo Search function ( 93).
2. Press the PHOTO button fully down to take the still image E • The camcorder takes the image immediately, and then records the “photo” to the tape for approximately 6 seconds. During this time the camcorder also records the sound, and the display shows the still image. • A counter display appears, and counts up as the camcorder records the still image. F disappears from the display. • The camcorder returns to record pause mode.
Selecting the Movie Mode (Normal/Frame) The frame mode can be used when you wish to look at a video, scene by scene, free from field slippage (the “flicker” that normally occurs when you pause a video). The vertical resolution of the image is improved by 1.5×. During playback, pause the video at any time if you would like to view a crystal clear still image in the display or on a connected TV screen. It is also possible to transfer your favorite still pictures to a PC for image enhancement and print out.
Searching and Reviewing While Recording Record Search When the camcorder is in record pause mode, you can use record search to play the tape forwards or backwards to find the point where you wish to start or restart recording. This is useful when you wish to add a new scene to a previously used cassette. By using record search, you can ensure a smooth, noise-free join between the new scene and the old one. TAPE + E REC SEARCH CAMERA 1.
Using the Various Recording Programs E The camcorder provides you with a choice of seven recording programs. They use different combinations of camcorder settings in order to adjust the exposure and other functions to match the recording situation.
Setting the Program AE Mode TAPE + CAMERA , CARD + E CAMERA 1. Slide the program selector to Q (program AE) mode. 2. Press the SELECT dial in and display the program menu. 3. Pull the SELECT dial up or down and move the arrow up or down the menu. 4. Press the SELECT dial in to select the desired program. • The program will appear in the display.
Giving Priority to Shutter Speed (Shutter-Priority: Tv) E Use this program to select the shutter speed. Aperture and gain are adjusted automatically. Tv Tv Select Tv mode and set the shutter speed by pulling the EXP dial up or down. • Pull toward + for a slower shutter (the image becomes brighter) and to – for a faster shutter (the image becomes darker). Shutter Speeds Recording • You can choose from 12 shutter speeds between 1/8 and 1/15000.
Manual ( 76) E Select this program for total creative freedom when operating the camcorder. You can set aperture, shutter speed and gain independently to give you exactly the exposure you require. You can select between 30 shutter speed settings (1/8 to 1/15000), 19 aperture values (f/1.6 to f/8.0) and 4 gain values (0dB to +18dB) in TAPE CAMERA mode. MANUAL Select MANUAL mode and set the shutter speed, aperture and gain. • For further details, see “Adjusting the Exposure Manually” ( 76).
Audio Recording Selecting the Audio Mode E The GL2 can record sound in two audio modes: • 16-bit (48 kHz, 2 channel) for the highest sound quality • 12-bit (32 kHz, 2 from 4 channels) for recording on two channels (stereo 1), leaving two channels (stereo 2) free for you to add new sound at a later date. TAPE + CAMERA , TAPE + PLAY (VCR) * * Only available when AUDIO DUB. has been set to MIC. IN. VCR SET UP ( AUDIO MODE•• 16bit 20) 1.
Adjusting the Audio Recording Level E The camcorder sets the audio recording level automatically when the REC LEVEL switch is set to A. However, you can manually adjust the recoding level of the built-in microphone or an external microphone connected via the MIC terminal or advanced accessory shoe (including microphones connected via the optional MA-300 Microphone Adapter). The camcorder is equipped with a audio level indicator at the side.
Using the Custom Key You can assign frequently used functions to the custom key (independently for TAPE CAMERA mode, TAPE PLAY (VCR) mode, CARD CAMERA mode and CARD PLAY (VCR) mode). This allows you to customize the camcoder to your recording situations.
Operating the CSTM KEY Button E • A function assigned to a custom key is referred to as a button of that effect (e.g. “INDEX WRITE” button). Index Write TAPE + CAMERA You can add an index signal to your recording for easy search in VCR mode. • You cannot add or erase the index signal later. • You cannot use the “INDEX WRITE” button during photo nor interval timer recording. • Index Write can be operated only by the CSTM KEY.
TV Screen E TAPE + CAMERA TAPE , PLAY (VCR) + + CARD , CAMERA CARD , + PLAY (VCR) You can display the information on the LCD screen/viewfinder on a connected TV. Press the “TV SCREEN” button to display the information on the TV screen. Press the button again to cancel. Microphone + TAPE CAMERA + TAPE , PLAY (VCR) * * Only available when AUDIO DUB. has been set to MIC. IN. Press the “MIC” button. Select the sound quality (NORMAL, VOICE, W.
TAPE Audio Level Indicator + CAMERA , TAPE + PLAY (VCR) E Press the “AUDIO LEVEL” button to display the audio level indicator on the LCD screen/viewfinder. Press the button again to cancel. AE Shift TAPE + CAMERA CARD , + CAMERA • Only available when the recording program is set to AUTO, Tv or Av. Press the “AE SHIFT” button to display the AE SHIFT menu. Pull the SELECT dial up or down and select between –2.0 and +2.0. Press the SELECT dial in to close the menu.
Using Digital Effects Show your creativity by using the special effects and digital faders. These digital effects and faders can add visual appeal and greater imaging variety. E Faders: Start or end scenes on a tape with a fade to or from black ( 62). Fade Trigger, Wipe*, Overlap* Effects: Add flavor to your recordings ( 65). Black and White, Sepia, Art, Mirror, Mosaic, Strobe*, Trail* Color Bars: You can display and record industry standard SMPTE color bars ( 67).
Overlap E The camcorder retains the last recorded scene as a still image before entering the record pause mode. When you start recording, the still image gradually changes to the scene you are recording. Operating the Fade Trigger Sound and image fade together. When operating faders in TAPE CAMERA mode, make sure the program selector is set to Q. TAPE + CAMERA FADER ( FADER••••••• FADE-T 151) 1. Press the D.EFFECTS/BARS SELECT button. • The digital effects menu appears. 2.
Operating Wipe and Overlap E When operating faders in TAPE CAMERA mode, make sure the program selector is set to Q. TAPE + CAMERA FADER ( FADER••••••• OVERLAP 151) 1. Press the D.EFFECTS/BARS SELECT button. • The digital effects menu appears. 2. Select FADER and press the SELECT dial in. • FADE-T, WIPE and OVERLAP settings appear. 3. Select WIPE or OVERLAP and press the D.EFFECTS/BARS SELECT button. • The menu closes and the name of the selected fader flashes in the display. 4. Press the D.
Effects E Black and White (BLK & WHT) The image becomes black and white. Sepia The image becomes monochrome with a brownish tint. Art The image becomes like a paint (solarization). Creates a symmetrical image as if there would be a mirror in the middle of the screen. Recording Mirror Mosaic The image is blurred through enlarging the size of some pixels. Strobe The image is shown in a series of still images, giving an effect similar to slow-motion.
Operating the Effects E TAPE + CAMERA EFFECT ( EFFECT•••••••BLK&WHT 151) 1. Press the D.EFFECTS/BARS SELECT button. • The digital effects menu appears. 2. Select EFFECT and press the SELECT dial in. • The settings appear. 3. Select the effect setting and press the D.EFFECTS/BARS SELECT button. • The menu closes and the name of the selected effect flashes in the display. 4. Press the D.EFFECTS/BARS ON/OFF button. Recording • The name of your selection stops flashing and the effect is activated.
Using the Color Bars You can display and record industry standard SMPTE color bars. E Activating the Color Bars TAPE + CAMERA COLOR BARS ( 151) 1. Press the D. EFFECTS/BARS SELECT button. • The digital effects menu appears. 2. Select COLOR BARS and press the SELECT dial in. • The menu closes and COLOR BARS flashes in the display. 3. Press the D. EFFECTS/BARS ON/OFF button. • The color bars appear in the display. • Each time you press the D.
Using a Canon Speedlite for Flash Photography (Optional) For SLR-style flash photography, attach a Canon Speedlite 220EX, 420EX or 550EX to the camcorder’s accessory shoe. Refer also to the Speedlite instruction manual. E Attaching the Speedlite Turn the camcorder’s power off before attaching/detaching the Speedlite. Slide the Speedlite onto the accessory shoe and tighten the shoe lock. Operating the Speedlite Recording 1. Turn the power of the Speedlite on. • • • • Wait for the Speedlite to charge.
Recording with the Interval Timer With the interval timer, you can record images over a selected time with a selected interval. This function is useful when shooting flowers, animals, and other natural events. You can select an interval of 30 seconds, 1 minute, 5 minutes or 10 minutes, and a recording time of 0.5 seconds, 1 second, 1.5 seconds, or 2 seconds. E Example: 2 seconds recording time at a 5 minutes interval (= standby time of 5 minutes including the recording time of 2 seconds) 2 sec. 4 min.
Pausing the Interval Recording E Press the Start/Stop button. • The camcorder returns to record pause mode and INT T. flashes in the display. • Press the Start/Stop button again to restart recording. Ending the Interval Recording Set the camcorder to record pause mode and set INTERVAL T to OFF in the interval menu. Note: Recording • The remaining tape display may not appear.
Recording with the Self-Timer For stills E START /STOP PHOTO SELF TIMER MENU For movies STANDBY LOCK MENU This is useful when you wish to include yourself in the picture when recording movies or still images to tape or memory card. TAPE + CAMERA , CARD + CAMERA 1. Open the menu, select VCR SET UP and set the SELF-TIMER to ON or press the SELF TIMER button on the wireless controller. • SELF T. appears in the display. • To have the subject monitor recording, rotate the LCD panel 180° ( 44). 2.
Using the DV Control When another device such as a camcorder or a video recording device is connected to the GL2 via a DV cable, you can operate the other device (record and pause recording) by pressing the start/stop button on the GL2. E TAPE + CAMERA SYSTEM ( DV CONTROL•• OFF 20) 1. Open the menu and select SYSTEM. 2. Select DV CONTROL, set it to ON and close the menu. Pressing the start/stop button: A. When the GL2 is in record pause mode: GL2: Recording Connected device: Recording B.
Using the VL-3 Video Light (Optional) 1 E LOCK 1 K LOC LOCK TO AU ON F OF LO CK 3 Using the optional Video Light enables you to record even in dark rooms. This VL-3 Video Light attaches to the camcorder’s advanced accessory shoe for cable-free operation and is powered by the camcorder’s power supply. Refer to the VL-3 Video Light instructions for further details. Turn the camcorder’s power off before attaching/removing the Video Light. 1.
Using the DM-50 Microphone (Optional) E The high sensitive Directional Stereo Microphone DM-50 attaches to the advanced accessory shoe for cable-free operation and is powered by the camcorder’s power supply. Use it when recording or dubbing audio. Refer to the DM-50 Microphone instructions for further details. Turn the camcorder’s power off before attaching/removing the microphone. 1. Slide the microphone onto the accessory shoe and tighten with the shoe lock.
Using the MA-300 Microphone Adapter (Optional) E The MA-300 Microphone Adapter enables you to input audio to the camcorder with XLR connector equipped microphones, and to convert video signals for the BNC connector. Refer to the MA-300 Microphone Adapter instructions for further details. Attaching the Microphone Adapter to the Camcorder Turn the camcorder off before attaching/detaching the microphone adapter. 1. Slide the microphone adapter straight onto the camcorder’s accessory shoe. 2.
Adjusting the Exposure Manually E EXP 1. Set the recording program to MANUAL. 2. Press the EXP dial in. • An arrow appears next to the shutter speed value. shutter speed iris no display gain 3. Pull the EXP dial up or down to increase or decrease the shutter speed. Recording • You can select between 30 shutter speeds (1/8 to 1/15000) in TAPE CAMERA mode and 15 shutter speeds (1/60 to 1/720) in CARD CAMERA mode. • See “About the Shutter Speeds” ( 77). 4. Press the EXP dial in.
● About the Shutter Speeds E Pull the EXP dial toward + for a slower shutter speed, or toward – for a faster shutter speed.
Exposure Lock/Adjustment E ●Exposure lock Lock the exposure at the current level in order to control the brightness of the image. To lock the exposure, press the EXP dial in. Press it again to return to the automatically set exposure level. EXP Notes: • You cannot lock the exposure in the [ (Easy Recording) or MANUAL recording program. • The standard exposure level depends on which recording program you have selected, but the shutter normally operates at 1/60 of a second.
Adjusting the Focus Manually The camcorder focuses automatically. All you have to do is point, and whatever is in the center of the display will usually be in sharp focus. If it does not seem to be focusing well, it may be because the subject is not suitable for autofocus ( 144). Also, if you attach a filter other than UV or ND, the autofocus may not work effectively. E 1. Slide the program selector to Q. 2. Push the FOCUS A/M button so that MF appears in the display. 3.
Setting the White Balance The camcorder’s auto white balance system compensates for a wide range of lighting conditions. Although slight variations are unavoidable, colors will appear natural in virtually every situation. E In some cases, you will get better results by setting the white balance yourself, or using one of the two preset modes: W.
Setting the white balance manually will probably work better than auto white balance when shooting: E Subjects with one dominant color, such as sky, sea or forest Close-ups In rapidly changing lighting conditions In places lit by certain types of fluorescent or mercury vapor lights Recording Notes: • Turn the digital zoom off (if necessary) to set a more accurate white balance.
Using AE Shift By controlling the level of the automatic exposure (AE) function, you can lighten or darken the image slightly. This allows you to compensate for backlit, overexposed scenes. E TAPE + CAMERA , CAM. SET UP ( CARD + CAMERA AE SHIFT•••• ±0 20) 1. Set the recording program to Auto, Tv or Av. Recording 2. Open the menu and select AE SHIFT. 3. Pull the SELECT dial up or down and select the desired level. • Levels are from –2 to +2, in 0.25 intervals (excluding –1.75 and +1.75).
Using the Custom Preset You can adjust the color gain, color phase, sharpness and setup level for more creative recordings. E Setting the Custom Preset Functions When you adjust the custom preset functions, be sure to check the picture before you start recording. You can save these settings under the CSTM PRESET button. TAPE + CAMERA , CARD + CAMERA CSTM PRESET ( 20) 1. Open the menu and select CSTM PRESET. • The custom preset menu appears. 2. Select the function you wish to adjust. 3.
Adjusting the Setup Level E CSTM PRESET ( SETUP LEVEL• - + 20) Adjust toward + for a brighter picture, and toward – for a darker picture. Activating the Custom Preset Functions 1. Turn the program selector to Q. 2. Press the CSTM PRESET button. Recording • The picture reflects your preferences.
Using the Zebra Pattern E The zebra pattern is a series of diagonal stripes that appear in the viewfinder to highlight areas of overexposure. Use it as a guide to set the aperture (iris) and shutter speed. You can also select the pattern appearance level from 80, 85, 90, 95, and 100%. Selecting the Zebra Pattern Level TAPE + CAMERA , CARD + CAM. SET UP ( CAMERA ZEBRA LEVEL• 90 20) 2. Select ZEBRA LEVEL and select the level. 3. Close the menu. Recording 1. Open the menu and select CAM. SET UP.
Recording PC Screens and Other Screens Using CLEAR SCAN You can use the Clear Scan function to record PC screens or other screens without black bands caused by differences in the field frequencies of screens. E TAPE + CAMERA CAM. SET UP ( CLEAR SCAN•• 60.5Hz 20) 1. Set the recording program to Tv or MANUAL. 2. Pull the EXP dial down until CS appears in the display. 3. Open the menu and select CAM. SET UP. 4. Select CLEAR SCAN and adjust the frequency so that no black bands appear in the display.
Playing Back a Tape E / CARD TAPE You can use the LCD screen for instant, on-the-spot playback. The camcorder also plays back the sound track via the built-in speaker ( 89). • When you play back a tape, you can also close the LCD panel with its screen side facing outward. • When you’re using the viewfinder to view playback, close the LCD panel. For playing back your recordings on a TV, see p. 95. For using the wireless controller, see p. 29.
Other Playback Modes E Playback pause Press the a (pause) button. To resume normal playback, press it again, or press the e (play) button. The camcorder automatically goes into stop mode after about 5 minutes’ playback pause. Fast forward playback To play back the recording at about 9.5 times normal speed, press and hold the 1 (fast forward) button during normal playback or press and hold the 1 (fast forward) button during normal fast forward. Rewind playback For reverse playback at about 9.
Built-in Speaker and Headphone Terminal E The camcorder has a built-in speaker and a headphone terminal. You can listen to the sound during playback. Use the speaker or headphones when using the LCD screen for playback, and use headphones when using the viewfinder. The built-in speaker is monaural; use headphones for stereo sound. Built-in Speaker Adjust the speaker and headphone volume by pulling the SELECT dial up or down.
Displaying Date, Time and Camcorder Data (Data Code) A data code containing the date and time the recording was made and other camcorder data (shutter speed and exposure settings) is automatically recorded on a special data section of the tape. • Only the date and time appear in the data code when using a memory card. E DATA CODE During TAPE PLAY (VCR) mode, the data code can be displayed or hidden while the camcorder is in play, slow or still mode.
Setting the Data Code E You can also choose to display the camcorder data (shutter speed and exposure settings) in the data code. TAPE + PLAY (VCR) DISP.SET UP ( DATA CODE••• DATE/TIME 20) Open the menu and select DISP.SET UP. Then select DATA CODE, set it to DATE/TIME, CAMERA DATA or CAM. & D/T and close the menu. Available data code combinations in TAPE PLAY (VCR) mode : D/TIME SEL. DATA CODE (cassette only) Date/Time Date/Time & Camera data JAN. 1,2002 12dB F11 1/250 12dB F11 1/250 JAN.
Six-second Auto Date E The date can be displayed for 6 seconds when you start playback, or to indicate that the date or time zone of the recording has changed. The 6-second auto date automatically adjusts to the time zone you have selected. TAPE + PLAY (VCR) DISP.SET UP ( 6SEC.DATE••• OFF 20) To turn the 6-second auto date on, open the menu and select DISP.SET UP. Select 6SEC. DATE, set it to ON and close the menu.
Searching the Tape (Photo Search/Date Search/Index Search) E ZERO SET SEARCH MEMORY SELECT AUDIO DUB. REW PLAY FF AV INSERT –/ STOP +/ REMOTE SET PAUSE SLOW ×2 This allows you to move quickly through still images (photo search), between different days or areas of recording (date search), or index signals ( 59) recorded anywhere on a tape (index search). TAPE + PLAY (VCR) 1. Press the SEARCH SELECT button to select between photo/date/index search.
Returning to a Pre-Marked Position (Zero Set Memory) E ZERO SET SEARCH MEMORY SELECT AUDIO DUB. REW PLAY FF AV INSERT –/ STOP +/ REMOTE SET PAUSE SLOW ×2 Use the wireless controller to mark a point on a tape to which you wish to return following the playback. TAPE + CAMERA , TAPE + PLAY (VCR) 1. Press the ZERO SET MEMORY button on the wireless controller during playback at a point you wish to return to later.
Connections for Playback on a TV Screen For higher picture quality, we recommend playing back recordings on a TV with an S (S1) terminal. If you connect the camcorder to a TV with an S1 terminal or the Video ID-1 system, recordings made in the 16:9 mode for wide screen TVs will be automatically played back in wide screen mode on the TV screen. E See your TV or VCR instruction manual for further details.
If Your TV (or VCR) Has Audio/Video Input Terminals E STV-250N Stereo Video Cable L AUDIO R VIDEO • Connect the camcorder using the STV-250N Stereo Video Cable. Connect the white plug to the white audio terminal L (left). Connect the red plug to the red audio terminal R (right). Connect the yellow plug to the yellow video terminal VIDEO. • Set the TV/VIDEO selector on the television to VIDEO. • If you are connecting the camcorder to a VCR, set the input selector on the VCR to LINE.
Editing to a VCR E Playback the tape on the camcorder. STV-250N Stereo Video Cable L AUDIO R VIDEO S-150 S-video Cable S-VIDEO Record the scenes on the VCR. By connecting the camcorder to a VCR, you can edit your recordings in order to remove unwanted scenes, or to combine different shots to create your own video productions. Preparations 1. Connect the camcorder to the VCR. • See “Connections for Playback on a TV screen” ( 95). 2. Prepare the TV and VCR.
m (LANC) terminal E The m terminal allows you to connect compatible devices such as remote controllers that are m LANC compatible. Some buttons on editing equipment may operate differently from those on the camcorder. Notes: Editing • m (LANC) is a trademark. It stands for Local Application Control Bus System. • We cannot guarantee the results when connecting to equipment not bearing the LANC m symbol.
Dubbing to/from a Tape with Digital Video Equipment Digital video equipment fitted with the DV terminal allows you to edit, copy and transfer data digitally, with virtually no generation loss in image and sound quality. The DV terminal is for both line-in and line-out, since a single DV cable can handle data in both directions.
Dubbing E 1. Find a point on your recorded cassette slightly before the section you wish to copy and set it to playback pause mode. 2. Press the camcorder’s REC PAUSE button. • The camcorder enters record pause mode. 3. Start playback on the other digital device while you monitor the picture. 4. Press the e/a (play/pause) button on the camcoder or the PAUSE a button on the wireless controller. • Recording starts. 5.
Recording from a VCR, TV or Analog Camcorder (Analog Line-in) You can record a video played on your VCR or analog camcorder (for digital camcorder, see p. 99) or a TV program onto a tape in the GL2, if the TV or other device has audio/video outputs. • If an anomalous signal is sent from the TV or VCR, the images recorded on the tape may also be anomalous (although it may not appear so on the TV image), not recorded at all, or COPYRIGHT PROTECTED DUBBING RESTRICTED may appear in the viewfinder.
Dubbing E 1. Find a point on your recorded cassette slightly before the section you wish to copy and set it to playback pause mode. 2. Press the REC PAUSE button. • S-video and audio IN/OUT terminals work as input terminals. • The camera enters record pause mode. 3. Start playback on the other device or turn on the TV to see the desired program while you monitor the picture. 4. Press the e/a (play/pause) button on the camcorder or the PAUSE a button on the wireless controller. • Recording starts. 5.
Digitally Outputting Analog Video and Audio Signals (Analog-Digital Converter) E Connecting the camcorder to your VCR or 8 mm video camera allows conversion of recorded analog video and audio signals to digital signals in an instant. The digital signals can be output to the other equipment with a DV terminal. The camcorder’s DV terminal works exclusively as an output terminal.
Turning the Analog-Digital Converter On E TAPE + PLAY (VCR) VCR SET UP ( AV DV OUT••• OFF 20) To turn the analog-digital converter on, open the menu and select VCR SET UP. Then select AV \ DV OUT, set it to ON and close the menu. Caution: Editing • For normal use, set AV \ DV OUT to OFF through the menu. If it is set to ON, you cannot input digital signals through the camcorder’s DV terminal.
Recording Over Existing Scenes (AV Insert Editing) You can insert and replace images/audio recorded on the camcorder’s tape with images/audio recorded with other video equipment using analog line-in or DV terminals. Original video and audio will be replaced with the new video and audio.
Preparations E The tape in the camcorder: When using the GL2’s AV insert function, only use to tapes recorded in SP mode with continuously recorded time codes. If there are non-recorded portions or portions recorded in LP mode on the tape, recording will stop. The playback tape: Use only tapes without non-recorded portions. If there are non-recorded portions or changes in the recording mode, you may not be able to insert AV correctly.
Editing E 1. On the VCR, locate a point 3 seconds before the scene to be inserted. Set the VCR to playback pause mode. 2. On the camcorder, press PLAY and locate the recording start point. Set the camcorder to playback pause mode. • You can use the playback buttons on the body of the camcorder or the special playback functions on the wireless controller in the same way as in playback mode. 3. Press the AV INSERT button. • AV INSERT and 2a appear in the display. 4. Play back the tape in the VCR. 5.
Audio Dubbing You can add sound to the original sound on a pre-recorded tape from audio devices (AUDIO IN) or with the internal or external microphone (MIC. IN). The original sound will not be erased. If there are non-recorded portions on the tape, or portions recorded in a mode other than SP mode, or with 16-bit or 12-bit 4-channel sound, dubbing will stop.
Preparations E Turn the camcorder’s POWER switch to PLAY (VCR) and move the camcorder’s TAPE/CARD switch to TAPE. Load a recorded cassette. • Make sure the REC/SAVE tab on the cassette has been slid to REC (closed position). Dubbing / ZERO SET SEARCH MEMORY SELECT AUDIO DUB. REW PLAY FF AV INSERT –/ STOP +/ REMOTE SET PAUSE SLOW ×2 AUDIO REC LEVEL A M Do not connect/disconnect any cables to/from the camcorder when dubbing audio or preparing to dub audio.
6. Adjust the input signal level. E AUDIO IN Automatic adjustment: 1.Slide the REC LEVEL switch to A. Manual Adjustment: 1.Slide the REC LEVEL switch to M. 2.Turn the L/R LEVEL dials to adjust the recording level. • Adjust it that the level slightly exceeds the 12 point. • Adjust the balance by turning the L/R LEVEL dial if necessary. • Even if you turn down the LEVEL dial, the sound may be distorted if the input level is still too high.
Setting the Audio Mix E MIX AUDIO BALANCE MONITOR ST-1 ST-2 When you play back a tape that was recorded in 12-bit mode, you can set the audio output to stereo 1 (the original sound), stereo 2 (any new sound, dubbed to the tape after recording), or mix the balance between the two. • Audio from the 16-bit mode only contains stereo 1 sound and so you cannot/do not need to select the audio mix. The same applies to the 12-bit stereo 1 mode, unless new sound has been added post-recording.
Selecting Audio Output Channels E When you play back a tape whose audio has been recorded on multiple channels, you can change the output channels of that sound. TAPE + PLAY (VCR) VCR SET UP ( OUTPUT CH••• L/R 20) 1. Load a tape recorded with multiple-channel audio. 2. Open the menu and select VCR SET UP. Then select OUTPUT CH, set it to the desired setting and close the menu. • Refer to the following list.
Connecting to a PC Using a DV Cable By using a DV cable and connecting the camcorder to a PC equipped with a DV terminal conforming to IEEE 1394/DV compatible capture board, you can transfer images taken with the camcorder to your PC. • While connected, it is recommended that you power your camcorder from a household power socket using the power adapter. • Turn off the power of both the camcorder and the PC before connecting. • Optional software necessary.
Memory Card Introduction The camcorder can record, store and manage still images on 2 types of memory cards: the SD Memory Card (supplied with the camcorder) or the MultiMediaCard (commercially available). The SD Memory Card has the protect switch to protect your recordings from accidental erasure. The SD Memory Card and the MultiMediaCard fit into the same slot.
Inserting and Removing the Memory Card E 1. Turn the POWER switch to OFF. • When removing the memory card, make sure the card access indicator is off. 2. Open the memory card compartment cover in the direction of the arrow. 3. Insert or remove the memory card. • Push the memory card all the way in. • Remove the memory card by pushing the card in and letting it spring out. Do not attempt to pull the memory card out without first pushing it in. 4. Close the memory card compartment cover.
Selecting the Image Size E Image Size: 1488 × 1128 pixels/640 × 480 pixels CARD + CAMERA Still Images CARD SET UP ( IMAGES RES.• 1488×1128 20) To change the image size of a still image, open the menu and select CARD SET UP. Then select IMAGES RES., set it to “640 × 480” and close the menu. • “640” appears in the display. Maximum Number of Still Images on an 8 MB Memory Card and Their File Sizes Image Size Image Quality Fine Standard 1488 × 1128 No of Images File Size per Image Approx.
File Numbers E The still images are automatically assigned file numbers from 0001 to 9999 and stored in folders of 9999 images each. Each folder is numbered from 100 to 999 and recorded on the memory card. Set the image file numbers so that they reset each time a new memory card is inserted, or so that they count up continuously. 1 CONTINUOUS When the file numbers are set to CONTINUOUS, each image is assigned a different number, avoiding duplication of numbers.
Recording Still Images onto a Memory Card E CARD TAPE Card Access Indicator You can record still images onto the memory card. • Moving pictures cannot be recorded onto a memory card. • Memory cards cannot record audio. • When you are using an SD Memory Card, make sure the protect switch is set to allow recording. Make sure a memory card with enough memory available is inserted into the camcorder. While the card access indicator flashes, do not disconnect the power source or remove the memory card.
The indicators that appear in the display when recording to a memory card: E Image quality ( >>>> FINE 50 1488 Number of images that can still be recorded on the memory card Image size ( Backup battery ( 138) 115) 116) Remaining battery power ( 137) See also “The indicator that appear on the LCD screen when LCD mirror is turned on” ( 44).
Playing Back a Memory Card E / CARD SLIDE SHOW CARD TAPE Play back and view still images recorded on a memory card. (For details on connecting to a TV, see “Connections for Playback on a TV Screen” ( 95) • The camcorder may not be able to copy or play, etc., images recorded with a non-Canon camcorder. Do not change the data recorded on a memory card.
2 Card Jump Function E You can jump from the current image to the desired image of unadjacent image number without displaying the images one by one. The numbers shown in the upper right corner in CARD PLAY (VCR) mode indicate the image number of the current still image and the total number of still images on the memory card. CARD + PLAY (VCR) With a still image in the display, press and hold the CARD +/– button.
Settings of the Still Images Recorded on a Memory Card E / You can easily erase unwanted still images while viewing them, protect them from accidental erasure, or mark them for printing. (File Operation) ● Preventing Accidental Erasure (Protect ) Select important images and protect them from accidental erasure. • If a memory card is formatted, however, all images, including protected images, will be permanently erased. 1. 2.
File Operation (FILE OPER.) CARD + E PLAY (VCR) 1. With an image in the display, press the SELECT dial in to open the FILE OPER. menu. • PROTECT , PRINT MARK , and IMAGE ERASE settings appear. • If you select |RETURN, the menu disappears from the display. To protect an image 2. Select PROTECT • • • • and press the SELECT dial in. The protect mark appears on the image, and the image cannot be erased. Press the SELECT dial again to cancel it. If you select |RETURN, the menu disappears from the display.
Preventing Accidental Erasure (Protect) E REC SEARCH CARD SLIDE SHOW This section describes how to protect the still image from the Card Operation submenu when displaying an index screen in CARD PLAY (VCR) mode (including the way to cancel the setting). You can also protect a still image through the File Operation menu ( 123). Protecting an Image While Viewing an Index Screen CARD + PLAY (VCR) CARD OPER.
Marking a Still Image for Printing (Print Mark) E This section describes how to mark a still image for printing from Card Operation submenu in CARD PLAY (VCR) mode (including the way to cancel the setting). – When displaying an index screen, you can mark the still image for printing. – When playing back a single image, you can erase all print marks. You can also mark a still image for printing through File Operation menu ( 123).
Erasing all Print Marks E CARD + PLAY (VCR) CARD OPER. ( PRINT MARKS ALL ERASE 20) Make sure a memory card that has images recorded on it has been inserted into the camcorder. 1. With a still image in the display, open the menu and select CARD OPER. 2. Select PRINT MARKS • ERASE ALL PRINT MARKS ALL ERASE. ? YES NO appears in the display. 3. Select YES. • The print mark disappears from the image. Using a Memory Card 4. Close the menu.
Erasing Still Images E REC SEARCH CARD SLIDE SHOW This section describes how to erase still images from the Card Operation submenu when playing back a single image in CARD PLAY (VCR) mode. You can also erase a still image through the File Operation menu ( 123). CARD + PLAY (VCR) CARD OPER. ( IMAGE ERASE 20) Make sure a memory card that has images recorded on it is inserted into the camcorder. To erase still images one at a time 1. Select the still image you wish to erase.
To erase all still images in a folder E 1. Open the menu and select CARD OPER. 2. Select IMAGE ERASE. • CANCEL, SINGLE and ALL settings appear. • To cancel erasing, select CANCEL and close the menu. 3. Select ALL. • ERASE ALL IMAGES? [EXCEPT FOR IMAGES] NO YES appears in the display. 4. Select YES. • All images in the folder of the displayed image except the protected ones are erased. • If you select NO, you return to step 2. Using a Memory Card 5. Close the menu.
Combining Images and Recording Them onto a Tape (Title Mix) Combine a title image recorded on a memory card with camcorder recordings. You can change the color of a title and adjust the mix level. E Creating a Title Image • Speedlite and video light cannot be used when creating a title. TAPE + CAMERA TITLE MIX ( 20) 1. Insert a memory card into the camcorder. 2. Slide the POWER switch to CAMERA and the TAPE/CARD switch to TAPE. 3. Open the menu and select \ TITLE MIX. • The title mix menu appears.
Selecting a Title Image E TAPE + CAMERA 1. Slide the POWER switch to CAMERA and the TAPE/CARD switch to TAPE. 2. Open the menu and select \ TITLE MIX. • The title mix menu appears. 3. Select \ TITLE SELECT. • Up to 6 titles images are displayed. 4. Select the title you wish to combine. 5. Press the SELECT dial in. • You return to the title mix menu. Activating the Title Mix 1. Slide the program selector to Q and select a recording program.
Erasing a Title Image E 1. Open the menu and select CARD OPER. 2. Select \ TITLE ERASE and press the SELECT dial in. • The title erase index screen appears. 3. Select the title image you wish to erase and press the SELECT dial in. • Check the title image on the index screen when selecting. • Erase this title? NO YES appears and the title image flashes. 4. Select YES and press the SELECT dial in. • The title image is erased.
Copying Still Images from Memory Card to Tape E / You can copy multiple still images from the memory card to a tape. • The still images’ data codes will reflect the date and time the copies are made. CARD OPER. ( COPY[ ] 20) Make sure a memory card that has images recorded on it and a cassette that has enough recordable space have been inserted into the camcorder. TAPE + PLAY (VCR) 1. Locate the point on the cassette where you wish to start copying and set it to stop. CARD + PLAY (VCR) 2.
Formatting a Memory Card E Format new memory cards if you get the message CARD ERROR, or to permanently and quickly erase all still images on a memory card, including protected images. The SD Memory Card supplied with this camcorder has already been formatted for you. • Be cautious when formatting recorded memory cards. All images will be permanently erased. • If you use memory cards other than the supplied one, make sure to format them with the camcorder, not a PC or other device.
Connecting to a PC Using a USB Cable You can download still images from a memory card to a PC connected to the camcorder via the USB interface. By using the supplied software, you can organize, store and print out still images. When printing still images, you can add titles and frames to them. Use the USB cable and the Canon Digital Video Solution Disk software supplied with the camcorder.
Other Information and Precautions The camcorder formats memory cards in DCF (Design rule for Camera File system). Images recorded on a memory card with this camcorder can also be transferred to a PC with the use of the following products made for SD Memory Cards or MultiMediaCards: E PC Card Adapter: Holds a memory card and fits into a PC card slot found on most types of laptop PCs. FD Adapter: Holds a memory card and fits into a PC’s floppy disk drive.
Notes on Using the Batteries E Charging and Recording Times • These times vary — the safest policy is always to have 2 or 3 times as many battery packs as you think you will need. • You will get more recording time if you turn the camcorder off between shots, instead of leaving it in record pause mode. • The charging time varies depending on the charging conditions. Battery Pack BP-915 BP-930 BP-945 Battery Pack BP-915 BP-930 BP-945 Charging Time 1 hr. 25 min. 2 hr. 25 min. 3 hr. 40 min. Max.
How Much Power Is Left? E The indicator in the display shows you approximately how much charge the battery pack has left: Notes: ↓ • When the power is completely exhausted, “CHANGE THE BATTERY PACK” appears in the display for 4 seconds and the empty battery mark starts to flash. The power indicator light also flashes. • The indicator is not constant — it varies with the condition under which battery pack and camcorder are used.
E Installing the Backup Battery Open the backup battery cover and insert the CR2025 lithium battery with the + side facing outwards. Click the cover back into place. This backup battery allows the camcorder to retain the date and time and other settings when the main power source is removed. It has a life span of about a year. When it needs replacing (or if it has not been installed), the y mark flashes in the display. Remove the old battery by pushing it up, releasing and lifting it out.
Maintenance Cautions Avoid high temperatures and high humidity. • Do not leave the camcorder inside a car in hot weather, for example. • Be careful of heat radiating from video lighting equipment. • Do not take the camcorder into a humid room. E Avoid sudden changes in temperature. • If you take the camcorder from a cold place to a warm place, condensation may form on the lens and internal parts ( 142). Do not point the lens or viewfinder at strong light sources.
E Storage If you do not intend to use the camcorder for a longer time, store it in a dry area free of dust, and at temperatures no higher than 86°F (30°C). After storage, check each part and function of your camcorder to make sure everything is still working properly. Note: • These cautions also apply to accessories such as battery packs and cassettes. Maintenance Viewfinder • Clean the viewfinder screen. Rotate the viewfinder upwards.
Video heads • When mosaic-like noise appears on the playback picture, the video heads may be dirty. When the video heads are badly contaminated, the camcorder may show a blank blue screen or a warning. • For the best picture possible, after using the camcorder for approximately 20 hours, clean the video heads using Canon’s DVM-CL Digital Video Head Cleaning Cassette. If the “noise” remains, repeat the cleaning (up to maximum of 5 times). • Do not use a wet-type cleaning cassette, as this can cause damage.
E Condensation Condensation may form on the camcorder when it is moved from a cold place to a warm place. Using the camcorder while condensation is present can damage both the tape and the camcorder.
Troubleshooting Refer to this checklist first if you have any problems with your camcorder. Possible explanations are given for each problem on the list — turn to the page numbers in parentheses for more information. E Make sure that the camcorder is properly connected if you are using it with a TV or VCR. Consult your dealer or service outlet if problems persist. Recording/Playback Problem Cause and/or what to do about it ? Nothing happens when I press the buttons.
Note: E • Some subjects are not suitable for autofocus. In these situations, you will often get better results using manual focus ( 79). Focus on something which is about the same distance away, lock the focus, and then point the camcorder at your original, hard-to-focus subject. Horizontal stripes Many subjects at different distances Behind glass Without much contrast (e.g. a white wall) Reflective surfaces (e.g.
Memory Card Operations Problem Cause and/or what to do about it ? The memory card will not insert. • It is not turned the right way ( 115). Turn it the right way and try inserting again. ? The mark flashes red in the display even though a memory card has been inserted. • Turn the camcorder’s power off and back on again and remove and reinsert the card. If the mark continues to flash, format the memory card. ? Nothing happens when I press the buttons.
Additional Information E 146 Miscellaneous Problem Cause and/or what to do about it ? The wireless controller does not work. • The remote sensor mode is set to OFFB in the menu ( 30). • The remote sensor modes of the wireless controller and the camcorder itself are different ( 30). • The batteries are dead or not inserted. ? The power indicator is flashing. • Check the screen displays ( ? There are air bubbles inside the lens.
The GL2 System Diagram (Availability differs from area to area) E VL-3 Video Light SS-650 Shoulder Strap DM-50 Directional Stereo Microphone WL-D77 Wireless Controller MiniDV Video Cassette CB-920 Car Battery Adapter (Available soon) DC-920 DC Coupler BP-900 Series Battery Pack MA-300 Microphone Adapter WD-58H CA-920 Compact Power Adapter BP-900 Series Battery Pack CH-910 Dual Battery Charger/Folder S-150 S-video Cable ZR-1000 Zoom Remote Controller TV STV-250N Stereo Video Cable VCR 220EX/4
Optional Accessories E Call or visit your local retailer/dealer for genuine Canon video accessories. You can also obtain genuine accessories for your Canon camcorder by calling: 1-800-828-4040, Canon U.S.A. Information Center. BP-915, BP-930, BP-945 Battery Packs Extra batteries for use with the GL2. CB-920 Car Battery Adapter Power your camcorder, or recharge battery packs on the move.
VL-10Li Battery Video Light E This compact yet powerful video light can be used for both indoor and outdoor shooting. • Use the BP-900 Series battery packs to power the light. Approximate usage times are as follows: BP-915: 60 min., BP-930: 120 min., BP-945: 170 min. 220EX/420EX/550EX Speedlite Attach them to the GL2 to give SLR-style flash photography.
Screen Displays E You can select to display or hide the operating state of the camcorder on the LCD screen/viewfinder. The display also appears on a TV connected to the camcorder. TV SCREEN DATA CODE TV Screen Displays Press the wireless controller’s TV SCREEN button or set TV SCREEN to OFF in the menu to hide the displays on the TV screen. You can also use the custom key if it is set to TV SCREEN ( 58). (The displays appear white on the screen.
Screen Displays in TAPE CAMERA Mode E qwert y #0 @9 @8 @7 @6 @5 @4 @3 @2 @1 T SP REC MANUAL 0:12:34 S1/500 10sec 60min F1.8 SELF–T 0dB j h A1 ON CP NDMF VOICE MF CHAR.REC 16bit [DV IF]16:9 FADE–T PHOTO U N.Y. 12:00 AM JAN.
E Screen Displays in CARD CAMERA Mode qw @2 @1 @0 !9 !8 !7 !6 !5 W White Balance ( 80) Self-Timer Countdown ( Image Stabilizer ( 46) Image Quality ( 115) Remaining Card Capacity ( 119) y Image Size ( 116) u Remaining Battery Charge ( 137) 71) FINE 9999 1488 T MANUAL S1/720 F2.0 0dB ON CP NDMF MF 10SEC SELF–T j h A1 r t y u i 12:00 AM JAN.
Caution Phrases The camcorder displays various caution phrases for approx. 4 seconds. E SET THE TIME ZONE, DATE AND TIME Time zone, date and time are not set. This message appears each time you turn the power on until you set the time zone, date and time ( 32). Battery pack is exhausted. Replace or charge the battery pack. CHANGE THE BATTERY PACK Replace the tape or change the position of the protect switch THE TAPE IS SET FOR ERASURE on the cassette ( 18, 19).
E COPYRIGHT PROTECTED DUBBING RESTRICTED You attempted to copy a copyright protected tape. May also be displayed when an anomalous signal is sent during Analog Line-in recording ( 100, 101). Memory Card Caution Phrases Memory card not inserted into the camcorder ( 115). NO CARD THE CARD IS SET FOR ERASURE PREVENTION The SD Memory Card is set for erasure prevention. Replace the card or change the position of the protect switch ( 114). No title image is recorded on the memory card.
Specifications GL2 Power supply (rated): Power consumption (AF turned on): Television system: Video recording system: Audio recording system: Image sensor: Tape format: Tape speed: Maximum recording time (80 min.
A/V terminal input/output: E S-video terminal input/output: MIC terminal input: Headphone terminal: LANC terminal: Operating temperatures: Dimensions: Weight: ø3.5 mm minijack Audio input: 0 dBV (47 kohm load)/ 47 kohms (AUDIO ATT ON) -10 dBV (47 kohm load)/ 47 kohms (AUDIO ATT OFF) Audio output: 4 dBm (47 kohm load)/3 kohms or less Video: 1 Vp-p/75 ohms unbalanced 1 Vp-p (Y signal), 0.286 Vp-p (C signal) ø3.5 mm stereo mini-jack -35 dBV (with 600 ohm mic)/5.
Index 16:9 Guides ···············································38 16:9 Wide Screen ······································37 6-Second Auto Date.
E Ê ˆ ND Filter·····················································47 Tally Lamp ··················································31 Tape Protection ··········································19 Telephoto ···················································42 Time Code ···········································38, 94 Time Zone··················································32 Title Mix···················································129 Tripod ························································
Menu at a Glance Camcorder Setting Submenu Function h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h h CAM. SET UP DISP. SET UP DISP. SET UP CAM. SET UP VCR SET UP VCR SET UP VCR SET UP DISP. SET UP VCR SET UP SYSTEM DISP. SET UP SYSTEM CAM. SET UP CUSTOM PRESET CUSTOM PRESET CARD OPERATION CUSTOM KEY DISP. SET UP DISP. SET UP DISP. SET UP SYSTEM DISP. SET UP CAM. SET UP DISP.
E Camcorder Setting Additional Information Setup Level Sharpness Shutter Sound Tally Lamp Time Zone/DST Title Mix TV Screen Viewfinder Brightness Wireless Controller Zebra Pattern Zebra Pattern Level 160 Submenu Function h h h h h h h h h h h h h h h h h h h h h h h h h h h CUSTOM PRESET CUSTOM PRESET CARD SET UP SYSTEM SYSTEM →TITLE MIX DISP. SET UP DISP. SET UP SYSTEM CAM. SET UP CAM.
U.S.A. CANON® GL2 DIGITAL VIDEO CAMCORDER LIMITED WARRANTY E The limited warranty set forth below is given by Canon U.S.A., Inc. (“CUSA”) with respect to each Canon GL2 Digital Video Camcorder (“DV Camcorder”) purchased and used in the United States.
CANADA E CANON CONSUMER DIGITAL VIDEO EQUIPMENT LIMITED WARRANTY The limited warranty set forth below is given by Canon Canada Inc. (“Canon Canada”) with respect to Canon digital video equipment purchased in Canada. This limited warranty is only effective upon presentation of a bill of sale or other proof of purchase for this Canon digital video equipment to a Canon Service Facility when repairs are required.
CANON INC. U.S.A. CANON U.S.A., INC. NEW JERSEY OFFICE 100 Jamesburg Road, Jamesburg, NJ 08831 USA CANON U.S.A., INC. CHICAGO OFFICE 100 Park Blvd., Itasca, IL 60143 USA CANON U.S.A., INC. LOS ANGELES OFFICE 15955 Alton Parkway, Irvine, CA 92618 USA CANON U.S.A., INC. HONOLULU OFFICE 210 Ward Avenue, Suite 200, Honolulu, HI 96814 USA ● If you have any questions, call the Canon U.S.A. Information Center toll-free at 1-800-828-4040 (U.S.A. only). CANADA CANON CANADA INC.
