User Manual

Direct Print & Scan for Mobile V2.0 Installation and User’s Guide 19
Chapter 2 Installing DPSM
This chapter describes how to install and start the DPSM MEAP application on a MEAP-
enabled imageRUNNER ADVANCE or imageRUNNER machine using the MEAP SMS
program.
The System Administrator for the target MEAP device must install the DPSM software using
a networked computer that is connected to the MEAP device.
MEAP SMS is the program interface used to install the DPSM software. You can access the
SMS Login screen via a Web browser.
Before installation, you must obtain the license file from www.canon.com/Meap, and have
the IP address of the MEAP device.
IMPORTANT
• Do not use the browser’s [Back] and [Forward] buttons during the installation process.
Only use the clickable links in the browser’s window.
• This procedure describes installing DPSM on an imageRUNNER ADVANCE machine.
For instructions on installing DPSM on an imageRUNNER machine, see the MEAP SMS
Administrator Guide that came with your MEAP device.
• MEAP Settings and Use HTTP settings (from the Settings/Registration screen or
Additional Functions screen) on the MEAP device must be enabled. (See the
Settings/Registration e-Manual or the Reference Guide that came with your machine.)
• For more information on using SMS or uninstalling MEAP applications, see the MEAP
e-Manual or the MEAP SMS Administrator Guide that came with your MEAP device.
1. Open a browser window ➞ enter the following URL:
http://<IP>:8000/sms
https://<IP>:8443/sms (if you are using SSL for communications)
(Replace <IP> with the IP address of the MEAP device.)