User Manual

Direct Print & Scan for Mobile V2.0 Installation and User’s Guide 207
3.1 If you selected [Scan QR Code], walk up to the MEAP device ➞ from the
Main Menu, press [Print & Scan].
3.1.1 Hold your iPhone or iPad’s camera lens over the QR code on the
MEAP device.
Your iPhone or iPad automatically scans the barcode. If the scan is
successful, the MEAP device is added to the Canon Device’s List.
In the screen shot above, Security is enabled, and a Security Code
is displayed under the Connection Code. When you scan the
barcode, the security code is automatically attached, and you do
not have to enter the security code manually.
IMPORTANT
If your iOS device does not add the Canon device, you may have
to disable the SSL Settings. See “Disabling SSL
Communication,” on p. 32.