User Manual

Direct Print & Scan for Mobile V2.0 Installation and User’s Guide 41
3.2.5 Configuring the Barcode Settings
This section describes how to configure the Barcode settings of the MEAP
application. The Barcode Configuration screen enables the Administrator to print or
share the barcode for the DPSM MEAP application using a share URL. The barcode
displayed does not contain a Security Code, and the Security Code can only be seen
on the MEAP device.
Follow the procedure below to configure the barcode settings for the MEAP
application.
1. Click the [Barcode] tab.
The Barcode Configuration screen is displayed.