User Manual

Direct Print & Scan for Mobile V2.0 Installation and User’s Guide 47
3.2.6 Configuring the Logging Settings
This section describes how to configure the Console logging and File logging types,
and how to download and delete a log file.
Follow the procedure below to configure the Logging settings.
1. Click the [Logging] tab.
The Logging Configuration screen is displayed.
2. Click the Console Logging drop-down list ➞ select [Enabled] or [Disabled].
If you select [Enabled], all severity levels are logged.
The following eight logging severity levels for both Console Logging and File
Logging are supported. The number preceding the severity level is the numerical
code. The severity levels cannot be adjusted.
0 = Emergency
1 = Alert
2 = Critical
3 = Error
4 = Warning
5 = Notice
6 = Informational
7 = Debug