User Manual

58 Direct Print & Scan for Mobile V2.0 Installation and User’s Guide
3. Connect to a new device or an existing device.
3.1 To add a new device, select or touch [Scan Barcode] or [Enter Connection
Code].
IMPORTANT
To scan the barcode in the DPSM application on the MEAP device, your
mobile device must be equipped with a camera.
If there is a blank space, this means the Canon device was not given a name.
To connect to a device, you must assign the device a name. For more
information on naming a device, see the documentation that came with your
MEAP device.
If you selected [Scan Barcode], the message <Point your camera at the
barcode image and hold the camera steady to scan it.> may appear. Select or
touch [OK] to dismiss the message and start the barcode scanner.