Operation Manual
Table Of Contents
- DR-2010C/DR-2510C/DR-2010M/DR-2510M User Manual
- Introduction
- Contents
- Chapter 1 Before Using the Scanner
- Chapter 2 Setup
- Chapter 3 Basic Operation
- Chapter 4 CaptureOnTouch Settings
- Chapter 5 Other Scanning Methods
- 1. Scanning with CapturePerfect 3.0
- 2. Basic Scanning Procedure
- 3. Using the Scan Panel
- 4. Special Scanning
- Enhancing the Text of a Document
- Scanning Documents That Include Both Color and Black-and-White Pages
- Scanning Different Sized Documents Together
- Skipping Blank Pages
- Scanning (Single-Sided) 11" X 17"/A3 Documents
- Deskewing Documents
- Moire Reduction
- Correcting the Text Orientation of Documents
- Reducing Bleed Through for Thin Documents and Documents with Dark Reverse Sides
- Deleting Borders and Ruled Lines of a Specified Color (Red/Green/Blue)
- Enhancing the Red color for Black-and-White Scanning
- Creating Smaller Files
- Saving the Text Data of Documents as Search Keywords
- Specifying Security Settings for PDF Files (Windows only)
- Chapter 6 Scanner Driver Settings
- 1. Before Using the Scanner
- 2. Scan driver settings
- Scan Mode Settings
- Auto Color Detection
- Paper Size Settings
- Scan Resolution Settings
- Scanning Side Settings
- Correcting Image Skewing
- Moire Reduction
- Adjusting the Scan Area
- Brightness/Contrast Adjustment
- Gamma Curve Settings
- Image Contour Adjustment
- Image Rotation
- Correcting Text Orientation
- Removing the Document Background/Preventing Bleed Through
- Omitting a Specific Color
- Enhancing the Red Color
- Rapid Recovery System
- Double Feed Detection
- Feeding Options
- Prescan
- Registering Scanning Conditions
- Checking the Version
- Chapter 7 Maintenance
- Chapter 8 Troubleshooting
- Chapter 9 Appendix
- INDEX
Back Previous Page Next Page
Contents
27
3
Place the card horizontally, with the reverse side facing you, and the top of
the card facing down.
CAUTION
If you place cards to be fed vertically, they may not be ejected properly, and
cards that get jammed may be damaged when you remove them. Take care of
the orientation when placing cards.
Folio Scan enables you to scan documents that are larger than LTR/A4 and
therefore do not fit in the feeder. (The maximum size is 11" X 17"/A3.) To use the
function, fold the document in half lengthwise and place it into the feeder. The
DR-2010C/DR-2510C will scan both sides and combine the scanned images into
a single image.
IMPORTANT
• When folding the document, align the right and left sides and create a sharp,
straight fold. Otherwise the document may jam or the image may not be aligned
properly.
• The fold line itself will not be scanned. Keep this in mind if there is content
such as photos, diagrams, or text that spans the fold.
• For Folio scanning, only the Bypass mode can be used. Place documents one
at a time.
• Adjust the document guides to fit the width of the document. Otherwise, the
image may scan as skewed or shifted.
Placing Folded Documents