Operation Manual
Table Of Contents
- DR-2010C/DR-2510C/DR-2010M/DR-2510M User Manual
- Introduction
- Contents
- Chapter 1 Before Using the Scanner
- Chapter 2 Setup
- Chapter 3 Basic Operation
- Chapter 4 CaptureOnTouch Settings
- Chapter 5 Other Scanning Methods
- 1. Scanning with CapturePerfect 3.0
- 2. Basic Scanning Procedure
- 3. Using the Scan Panel
- 4. Special Scanning
- Enhancing the Text of a Document
- Scanning Documents That Include Both Color and Black-and-White Pages
- Scanning Different Sized Documents Together
- Skipping Blank Pages
- Scanning (Single-Sided) 11" X 17"/A3 Documents
- Deskewing Documents
- Moire Reduction
- Correcting the Text Orientation of Documents
- Reducing Bleed Through for Thin Documents and Documents with Dark Reverse Sides
- Deleting Borders and Ruled Lines of a Specified Color (Red/Green/Blue)
- Enhancing the Red color for Black-and-White Scanning
- Creating Smaller Files
- Saving the Text Data of Documents as Search Keywords
- Specifying Security Settings for PDF Files (Windows only)
- Chapter 6 Scanner Driver Settings
- 1. Before Using the Scanner
- 2. Scan driver settings
- Scan Mode Settings
- Auto Color Detection
- Paper Size Settings
- Scan Resolution Settings
- Scanning Side Settings
- Correcting Image Skewing
- Moire Reduction
- Adjusting the Scan Area
- Brightness/Contrast Adjustment
- Gamma Curve Settings
- Image Contour Adjustment
- Image Rotation
- Correcting Text Orientation
- Removing the Document Background/Preventing Bleed Through
- Omitting a Specific Color
- Enhancing the Red Color
- Rapid Recovery System
- Double Feed Detection
- Feeding Options
- Prescan
- Registering Scanning Conditions
- Checking the Version
- Chapter 7 Maintenance
- Chapter 8 Troubleshooting
- Chapter 9 Appendix
- INDEX
Back Previous Page Next Page
Contents
70
Under Mac OS X
1
Select a suitable setting for [Scanning Side]. (This is the same in Simple
Mode and Advanced Mode.)
NOTE
• Specify one of the settings below according to the page side setting you want to
use.
- [Simplex]
Scan only the front side of documents loaded into the feeder.
- [Duplex]
Scan both sides of documents.
- [Skip Blank Page]
As each document page is scanned, the scanner detects whether it is blank,
and if so, the image is not saved.
y Under Windows, selecting [Skip Blank Page] enables the [Setting] button,
which opens the [Blank Skip Setting] dialog box. Under Mac OS X, selecting
[Skip Blank Page] opens the content density setting screen.(The dialog box
shown below is an example from Windows, but the setting items are the
same under Mac OS X.)
y This screen serves for adjusting the content density used to judge whether
a page is to be considered blank. Increase the setting if blank pages are not
skipped, and decrease the setting if non-blank pages are skipped.
y The Skip Blank Pages function may not work properly if a [Custom] setting
is enabled for [Gamma Settings].
y If a scanning side setting (simplex or duplex) is specified in the application
settings, set [Simplex].
- [Folio]
Documents that are normally folded in half are scanned on both sides and
composed into one image.
y Under Windows, if the scanner driver settings screen was called from an
ISIS compatible application, you cannot click [Folio] if [Patchcode] is
selected in the [Batch Separation] box of the [Others] tab.