Operation Manual
Table Of Contents
- DR-2010C/DR-2510C/DR-2010M/DR-2510M User Manual
- Introduction
- Contents
- Chapter 1 Before Using the Scanner
- Chapter 2 Setup
- Chapter 3 Basic Operation
- Chapter 4 CaptureOnTouch Settings
- Chapter 5 Other Scanning Methods
- 1. Scanning with CapturePerfect 3.0
- 2. Basic Scanning Procedure
- 3. Using the Scan Panel
- 4. Special Scanning
- Enhancing the Text of a Document
- Scanning Documents That Include Both Color and Black-and-White Pages
- Scanning Different Sized Documents Together
- Skipping Blank Pages
- Scanning (Single-Sided) 11" X 17"/A3 Documents
- Deskewing Documents
- Moire Reduction
- Correcting the Text Orientation of Documents
- Reducing Bleed Through for Thin Documents and Documents with Dark Reverse Sides
- Deleting Borders and Ruled Lines of a Specified Color (Red/Green/Blue)
- Enhancing the Red color for Black-and-White Scanning
- Creating Smaller Files
- Saving the Text Data of Documents as Search Keywords
- Specifying Security Settings for PDF Files (Windows only)
- Chapter 6 Scanner Driver Settings
- 1. Before Using the Scanner
- 2. Scan driver settings
- Scan Mode Settings
- Auto Color Detection
- Paper Size Settings
- Scan Resolution Settings
- Scanning Side Settings
- Correcting Image Skewing
- Moire Reduction
- Adjusting the Scan Area
- Brightness/Contrast Adjustment
- Gamma Curve Settings
- Image Contour Adjustment
- Image Rotation
- Correcting Text Orientation
- Removing the Document Background/Preventing Bleed Through
- Omitting a Specific Color
- Enhancing the Red Color
- Rapid Recovery System
- Double Feed Detection
- Feeding Options
- Prescan
- Registering Scanning Conditions
- Checking the Version
- Chapter 7 Maintenance
- Chapter 8 Troubleshooting
- Chapter 9 Appendix
- INDEX
![](/manual/canon/dr-2010m/operation-manual-english/images/img-76.png)
Back Previous Page Next Page
Contents
76
Under Mac OS X
1
Switch to Advanced Mode and move the [Brightness] and [Contrast]
sliders to adjust the brightness and contrast of the scanned image.
NOTE
• The settings you can specify are as follows:
- [Brightness]
Adjusts the brightness of images to be scanned.
y If images are too dark or if text on the back bleeds through, drag the slider
to the right to increase the brightness.
y If images are too light, drag the slider to the left to decrease the brightness.
- [Contrast]
Adjusts the contrast of images to be scanned.
- [Used the Back Side Brightness] Check Box
If the brightness of the front and back of the document pages is different, select
this check box to adjust only the brightness of the back side.
- [Used the Back Side Contrast] Check Box
If the contrast of the front and back of the document pages is different, select
this check box to adjust only the contrast of the back side.
• The availability of brightness and contrast settings are as follows, according to
the setting selected in the [Mode] drop-down list.
{
: Available for setting − : Not available for setting, or automatically set
7
Scanning mode Brightness Contrast
Back Side
Brightness
Back Side
Contrast
Black and White
{{{{
Error Diffusion
{{{{
Advanced Text Enhance-
ment (only for Windows)
{ −−−
Advanced Text Enhance-
ment II
{{ −−
256-level Gray
{{{{
24-bit Color
{{{{
Auto Color Detection
{{{{