Compact Document Scanner STARTUP MANUAL Read this manual thoroughly before using this scanner. Keep this manual in a safe place for future reference.
International ENERGY STAR® Office Equipment Program As an ENERGY STAR partner, Canon Electronics Inc. has determined that this product meets the ENERGY STAR guidelines for energy efficiency. The International ENERGY STAR Office Equipment Program is an international program that promotes energy saving through the use of computers and other office equipment. The program backs the development and dissemination of products with functions that effectively reduce energy consumption.
READ CAREFULLY BEFORE OPENING THE SEALED DISK PACKAGE CANON SOFTWARE LICENSE AGREEMENT IMPORTANT-READ THIS AGREEMENT BEFORE OPENING THE SEALED DISK PACKAGE! BY OPENING THE SEALED DISK PACKAGE, YOU ARE DEEMED TO AGREE TO BE BOUND BY THIS AGREEMENT. This legal document is a license agreement between you and Canon Electronics Inc. ("Canon"). BY OPENING THE SEALED DISK PACKAGE, YOU ARE DEEMED TO AGREE TO BE BOUND BY THE TERMS OF THIS AGREEMENT.
Preface Thank you for purchasing the Canon DR-2080C scanner. Be sure to read this manual thoroughly before using the scanner in order to ensure that you fully understand how to use the scanner correctly. After you have read this manual, retain it for future reference.
Notational Conventions The symbols and indications used in this manual are explained below. Familiarize yourself with these symbols and their meanings before reading this manual. “(→ page 12)” Means “Refer to page 12 for more details.” WARNING This indicates a matter in which failure to follow proper procedure could result in loss of life or serious injury. In order to ensure safe operation, always observe these warnings.
Table of Contents Before Using the Unit ......................................................................................... 5 To Ensure Safe Operation ...................................................................................... 5 Installation Location ................................................................................................. About the AC adapter ............................................................................................... Moving the Scanner ..........
Before Using the Unit To Ensure Safe Operation In order to ensure safe operation, be certain to read the cautions described below. Installation Location At least 4 in. (100 mm) At least 4 in. (100 mm) At least 4 in. (100 mm) Longer than the document size (Document stop) The performance of this unit is affected by the environment in which it is installed. Make sure that the location where the unit is installed meets the following environmental requirements.
● Avoid unstable surfaces and locations subject to vibration. ● Avoid locations that are subject to rapid temperature changes. Condensation inside of the unit can result in inferior image quality. Use this unit under the following environmental conditions: Temperature: 10 degree C to 32.5 degree C Humidity: 20% to 80% RH ● Avoid locating the unit near equipment that generates electromagnetic fields, including speakers, televisions, and radios.
Notes on Normal Handling WARNING To avoid fire and electric shock, always observe the following warnings when using this unit. ■ Do not place flammable chemicals, such as alcohol or paint thinner, near the unit. ■ Do not cut, damage, or modify the power cord. Do not place heavy objects on the power cord, do not pull on the power cord, and do not bend the power cord sharply. ■ Do not plug in or unplug the power cord with wet hands. ■ Do not use multi-outlet adapters to connect multiple devices to one outlet.
CAUTION ■ Do not set the unit up on a wobbly platform, a sloped surface, or any other type of unstable location. Do not set up the unit in a location that is subject to vibration. The unit could injure someone if it falls or tips over. ■ Do not block the ventilation openings. Doing so could cause the unit to overheat, creating a risk of fire. ■ Do not place paper clips, staples, necklaces or any other metallic objects on top of the unit.
Features of the DR-2080C The main features of the DR-2080C scanner are listed below. ■ Compact size The scanner is extremely compact, 11.7W x 8.2H x 3.9D in. (298W x 209H x 99D mm). Further, because the DR-2080C is an upright scanner, it does not take up a lot of space. ■ SCSI/USB2.0 Interface supported The scanner is equipped with both SCSI and Hi-Speed USB 2.0 interface to be connected to a personal computer. ■ Color/Grayscale support Documents can be scanned in 24-bit color or 256-level grayscale.
■ “Skip blank page” function The scanner is equipped with a “skip blank page” function that allows it to scan a document regardless of whether every page is double-sided or single-sided. (This function is implemented by the ISIS/TWAIN driver.) ■ Pre-scan function The scanner is equipped with a pre-scan function that allows you to adjust the contrast and brightness of a pre-scanned image and then sends the adjusted image to the application software, without needing to scan the document again.
Checking the Packing List The contents of the carton in which this unit is shipped are described below. If anything is missing or damaged, contact your dealer or service representative. Feed roller w Document stop e Setup disc (CD-ROM) Startup manual (this manual) t Adjustment sheet y Quick Reference Guide u Software license agreement i Warranty card (U.S.A.
Removing Protective Tape and Protective Sheet Before using the scanner, remove the protective tape and protective sheet that protect the unit from damage during shipment. 1. Remove the protective tape that is attached to the exterior of the unit. 2. Remove the protective sheet from between the paper feed tray and the scanner. 3. Lift the edge of the paper feed tray to open it.
4. While squeezing the OPEN release (➀), open the front unit towards you (➁). 5. Remove the protective tape pasted on the inside of the scanner.
Names and Functions of Parts This section explains the name and function of each part. Familiarize yourself with the parts before connecting the scanner. ■ Front and right views Top cover Open this cover to set your document. Stop key Press this key to stop the document scanning. Power indicator This lights when you turn on the scanner. Start key Press this key to start the document scanning. Feed selection lever Sets the feeding method of documents.
■ Rear and left views DIP switches These set the SCSI ID. SCSI connector Connects to a 50-pin half-pitch (pin type) SCSI cable. Ventilation openings USB connector Connects to a HiSpeed USB 2.0compatible cable. Stand Pull this out to prevent the unit from toppling. Power connector Connects to the AC adapter provided with this unit. Power switch Turns the scanner’s power on and off. CAUTION Do not block the ventilation openings. Doing so could cause the unit to overheat, creating a risk of fire.
Installing the Scanner Before Setting Up the Scanner Extending the stand Extend the stand located at the rear of the unit to prevent it from toppling. Notice Make sure that you use the unit with the stand extended. If you do not use the stand, the unit may topple and be damaged. Installing the Feed Roller Open the front unit and install the provided feed roller. 1. Lift the edge of the paper feed tray to open it.
2. While squeezing the OPEN release (➀), open the front unit towards you (➁). 3. Open the roller cover inside the scanner. To open the cover, set your finger in the groove and lift. 4. Raise the roller lock lever (➀), and slide it in the direction of the arrow (➁). 5. Insert the feed roller into the groove inside the roller cover, and align the notch in the roller with the spindle in the front unit.
6. Slide the roller lock lever to the right, and set it into the hollow to the left of the roller. 7. Lower the lever to fasten the feed roller spindle. 8. Close the roller cover. Make sure that the cover clicks into place and is returned to its original position.
9. Gently press the upper left and right edges of the front unit. Make sure that the cover clicks into place and is returned to its original position. 10. Close the paper feed tray. 11. Close the top cover.
Installation Requirements In order to use the DR-2080C, your computer must satisfy the following system requirements: ● IBM PC/AT-compatible that satisfies the following specifications: • Intel Celeron 733MHz or faster • Main memory: 256 MB or more (recommended) • Hard disc space: 400 MB or more ● SCSI board or USB 2.
● The USB cable you are using should be the one originally bundled with the scanner or a Hi-Speed USB 2.0-compatible cable. ● Depending on the application software that you are using, the device driver provided may not operate, or you may not be able to use the functions described in this guide. ● Make sure that the device driver and application software that you will be using are compatible with your PC, the system configuration, and the type of SCSI board that you are using.
Installation Procedure The procedure for installing the unit is outlined below. (For a detailed outline of this procedure, see “Connecting the Scanner to Your PC” at the end of this section.) 1. Check the interface board in your computer. (→ page 23 “Interface Board”) ↓ 2. Connect the scanner to the PC. (→ page 25 “Connecting the Scanner to your PC”) ↓ 3. Connect the power cord to the scanner. (→ page 28 “Connecting the Power Cord”) ↓ 4. Turn the scanner on first, and then start up the PC.
Interface Board When connecting the scanner via USB, verify that the USB 2.0 interface board you are using is one recommended for use with the scanner. The recommended USB 2.0 interface boards are as follows: SCSI Boards When connecting the scanner via SCSI, verify that the SCSI board you are using is one recommended for use with the scanner.
USB 2.0 Interface Board When connecting the scanner via USB, verify that the USB 2.0 interface board you are using is one recommended for use with the scanner. The recommended USB 2.0 interface boards are as follows: Recommended USB2.0 Interface boards Manufacturer : Adaptec Models : USB2connect2000LP (AUA-2000) USB2connect3100 (AUA-3100LP) USB2connect5100 (AUA-5100) USB2connect for Notebooks (AUA-1420) Notice ● When installing the USB 2.
Connecting the Scanner to Your PC There are two ways of connecting the scanner to your computer, via SCSI or via USB. Choose either way suitable for the environment in which you are using the PC. Notice ● When the application is running, do not turn the scanner off nor unplug the interface cable. ● Do not connect both a SCSI cable and a USB cable concurrently. ● Do not connect multiple DR-2080Cs to one (1) computer. ● When having changed the connection, be sure to turn the scanner and the PC on once again.
Notice ● Make sure that the scanner and your PC are both turned off when connecting the scanner to the PC. ● Since the provided SCSI board uses a D-sub 25-pin connector, take care to connect the SCSI cable to the SCSI board connector, and not to the D-sub 25-pin connector of the printer port. ● The terminator of the scanner is set to ON as default. Be sure to turn off all terminators of the SCSI devices connected between the scanner and the PC. Note The SCSI ID is set to “2” at the factory before shipping.
Connecting via USB USB interface connection • Be sure to use the USB cable bundled with the scanner or a Hi-Speed USB 2.0-compatible cable. • When using a USB extension board that supports Hi- Speed USB 2.0, be sure to choose one verified for use with the scanner.(→ page 24 ) DR-2080C SCSI device Computer Flat-shaped connector Smaller squareshaped connector Notice ● If the OS you are using is Windows 95/NT, the connection via USB is not supported.
Connecting the Power Cord 1. Connect the power cord provided with the unit to the AC adapter. Notice ● Only use the power cord and AC adapter provided with this unit. ● Always be sure to turn the power switch off before plugging in the power cord. 2. Connect the AC adapter connector to the connector located on the left side of the scanner, and then plug the power cord into a power outlet.
Turning the Power On/Off Follow the procedures described below when turning the power on and off. Turning the Power On 1. Turn on the scanner. The power switch is located on the lower right rear corner of the scanner. To turn the scanner on, slide the power switch towards the “ |” mark. When the power indicator lights green, the scanner is on. 2. Turn on the PC.
3. In the “Copy manufacturer’s files from” box, type “D:\INF\Win95” (where “D” is the name of your CD-ROM drive), and then click the OK button. ● If you are using Windows 95 (OSR2), the “Update Device Driver Wizard” dialog box appears. 1. Click the Next button. 2. Click Other locations. 3. Load the setup disc into the computer’s CD-ROM drive. 4. Type “D:\INF\Win95” (where “D” is the drive letter assigned to your CDROM drive) and then click the OK button. 5. Click the Finish button.
4. Load the setup disc into the computer’s CD-ROM drive. 5. Type “D:\INF” (where “D” is the drive letter assigned to your CD-ROM drive) and then click the OK button. 6. In the “Driver Files Search Results” screen, click the Next button. 7. If the message “Digital Signature Not Found” appears, simply click Yes to continue installation. 8. On the “Completing the Found New Hardware Wizard” screen, click the Finish button. ● If you are using Windows XP, the “Found New Hardware Wizard” dialog box appears. 1.
Turning the Power Off CAUTION If the unit will not be used for an extended period of time, unplug the power cord for safety’s sake. 1. Turn off the PC. 2. Turn off the scanner. The power switch is located on the lower right rear corner of the scanner. To turn the scanner off, slide the power switch towards the “ ” mark. When the power indicator goes out, the scanner is off. Notice ● When connecting the DR-2080C via SCSI, turn the scanner on first, and then turn the PC on.
Installing the Software Notice Before installing the software, be sure to open and read the Readme.txt file on the setup disc. The setup disc included with the scanner contains the following software: ● ISIS/TWAIN driver This driver allows this scanner to be used with ISIS-compatible application software or TWAIN-compatible application software. The driver must be installed in order to be able to use the scanner. ● CapturePerfect This is a TWAIN-compatible software application.
1. Turn on your PC. Windows starts. Notice If you are using Windows NT 4.0 Workstation, Windows 2000 Professional, or Windows XP, be sure to log on as a user with administrator privileges. 2. Load the setup disc in the PC’s CD-ROM drive. 3. On the Start menu, Click Run. The Run dialog box appears. 4. In the Open box, type “D:\Driver\Setup.exe” (where “D” is the drive letter assigned to your CD-ROM drive) and then click the OK button. The Installer starts. 5.
Uninstalling the ISIS/TWAIN Driver Follow the procedure described below to uninstall the ISIS/TWAIN driver. Notice If you are using Windows NT 4.0 Workstation, Windows 2000 Professional, or Windows XP, be sure to log on as a user with administrator privileges. 1. On the Start menu, point to Settings and click Control Panel. Note If you are using Windows XP, on the Start menu, click Control Panel. The “Control Panel” window is displayed.
2. Double-click the “Add/Remove Programs” icon. Note If you are using Windows XP, click the “Add or Remove Programs” icon. The “Add/Remove Programs Properties” dialog box is displayed. Note If you are using Windows XP, the “Add or Remove Programs” dialog box is displayed. 3. Select “Canon DR-2080C Scanner Driver” from the list, and then click the Add/Remove button. Note If you are using Windows XP, click the Change/Remove button.
The “Confirm File Deletion” dialog box is displayed. 4. Click the Yes button to start the uninstaller. Follow the instructions on the screen and complete the uninstallation process.
Installing CapturePerfect Follow the procedure described below to install CapturePerfect. 1. Turn on your PC. Windows starts. Notice If you are using Windows NT 4.0 Workstation, Windows 2000 Professional, or Windows XP, be sure to log on as a user with administrator privileges. 2. Load the setup disc in the PC’s CD-ROM drive. 3. On the Start menu, click Run. The Run dialog box appears. 4. In the Open box, type “D:\CapturePerfect\Setup.
Uninstalling CapturePerfect Follow the procedure described below to uninstall CapturePerfect. Notice If you are using Windows NT 4.0 Workstation, Windows 2000 Professional, or Windows XP, be sure to log on as a user with administrator privileges. 1. On the Start menu, point to Settings and click Control Panel. Note If you are using Windows XP, on the Start menu, click Control Panel. The “Control Panel” window is displayed. 2. Double-click the “Add/Remove Programs” icon.
The “Add/Remove Programs Properties” dialog box is displayed. Note If you are using Windows XP, the “Add or Remove Programs” dialog box is displayed. 3. Select “CapturePerfect” from the list, and then click the Add/Remove button. Note If you are using Windows XP, click the Change/Remove button. The “Confirm File Deletion” dialog box is displayed. 4. Click the Yes button to start the uninstaller. Follow the instructions on the screen and complete the uninstallation process.
Using the Software Using the ISIS/TWAIN Driver The ISIS/TWAIN driver help describes how to use the ISIS/TWAIN driver. To access the ISIS/TWAIN driver help, click Start - Programs (when using Windows XP, click All Programs) - Canon Document Scanner - Canon DR2080C Help, or click the Help button displayed in the dialog box.
Using CapturePerfect Follow the procedure described below to start and close CapturePerfect. Note The basic method for scanning using CapturePerfect is described in the CapturePerfect help. From the Help menu on the CapturePerfect menu bar, click Help, then refer to the explanation of how to use CapturePerfect. Starting CapturePerfect 1. Turn on the scanner. 2. Turn on your computer. Windows starts. 3.
Closing CapturePerfect 1. On the File menu, click Exit. CapturePerfect closes.
Starting Up CapturePerfect by the Event Driven Function The DR-2080C and CapturePerfect together support the “Scanner Event” driven function of Windows. When the ISIS/TWAIN driver and CapturePerfect are installed in the PC, pressing the Start button on the scanner starts up CapturePerfect automatically. Note Windows 95/NT do not support this function. Verifying the “Scanner Event” 1. Open the “Scanner and Camera” folder. Note ● Windows 95/NT do not display the “Scanner and Camera” folder.
2. Select [CANON DR-2080C SCSI] (or, [CANON DR-2080C USB]) to display [Properties]. “Scanner and Camera” Properties (Window 98) “Scanner and Camera” folder (Windows XP) 3. Click the [Event] tab.
4. Confirm whether CapturePerfect is selected (checked). Note ● When started up by the event driven function, some applications may not operate normally. ● If you are not using the event driven function, select the “Disable device events” check box ● If you are using Windows 2000/XP, restart Windows to enable the Event settings you have changed.
Using the Scanner Documents This scanner is able to scan documents ranging in size from business cards to legal size documents. The scannable size range is: Width: Length: 2.2 in. to 8.5 in. (55 mm to 216 mm) 2.8 in. to 11.7 in. (70 mm to 297 mm) with page separation mode 2.8 in. to 14 in. (70 mm to 355 mm) with bypass mode Thickness: 0.0024 in. to 0.0059 in. (0.06 mm to 0.15 mm) with page separation mode 0.0019 in. to 0.0079 in. (0.05 mm to 0.
Loading a Document for Scanning Make preparations based on the size of the document and the feeding method that you want to use, and then load the document for scanning. Preparing for Scanning 1. Open the top cover. 2. Check the position of the feed selection lever and set it according to the type of document being loaded. To feed the sheets of the document individually, set the feed selection lever in the down position (page separation mode).
3. Align and set the document stop provided with the unit to the size of the document to be scanned. By using the document stop, you can prevent documents from becoming disorganized when they come out from the document eject opening. Place at a distance greater than the length of the document to be scanned. Scanning Long Documents When scanning documents that extend beyond the document feed opening, open the paper feed tray to set the document. 1. Open the paper feed tray.
Loading a Document for Scanning Notice When loading a document for scanning, be careful to remove all paper clips, staples, etc., from the document. During the scanning process, such objects can tear the document, cause paper jams and/or damage the scanner. 1. Set the paper feed select lever and paper side guide adapters according to the type of document to be scanned. (→ Page 48, 49) 2. Get ready to perform the scanning operation with the application software that you are using. 3.
5. Load the document in the document feed opening. Note ● Orient the document with the back side facing forward and top edge pointing down, and then load it into the document feed opening. ● If the document falls forward because the paper is too thin, pull out the paper feed extension plate and push the document so that it falls backward. ● When scanning a document folded in half, set the document with the fold on the right (➀) and turn the feed selection lever upward (➁).
6. Adjust the paper side guides. Note Before starting a scan, make sure that the document is loaded in the scanner correctly. Scanning a curled document or a creased document can damage the document. 7. Perform the scanning operation in accordance with the normal operating procedure for your application software.
Clearing Paper Jams If a paper jam occurs in the scanner, follow the procedure described below. CAUTION Be careful when removing jammed paper. It is possible to cut your hand on the edge of a sheet of paper. 1. If the paper feed tray is closed, open it. 2. While squeezing the OPEN release (➀), open the front unit towards you (➁). 3. Remove the jammed paper from the feed or eject section. Notice Do not pull hard on the jammed sheet; remove it gently.
4. Gently press the upper left and right edges of the front unit. Make sure that the cover clicks into place and is returned to its original position. 5. If necessary, close the paper feed tray. Note Once you have cleared the paper jam, check whether the scanned image on the last page has been stored properly or not, and then resume scanning.
Regular Maintenance Clean the scanner on a regular basis as described below in order to maintain peak scanning quality. CAUTION For safety’s sake, always turn the unit off and unplug the power cord before cleaning the unit. However, because the power must be on when cleaning the metal rollers, exercise extreme care when performing this operation.
Cleaning the Scanning Glass and Transport Rollers 1. Turn the power off and unplug the power cord from the power outlet. 2. Open the paper feed tray. 3. While squeezing the OPEN release, open the front unit towards you. 4. Wipe the scanning glass (the shaded portion ■ in the illustration) with a clean, dry cloth. CAUTION Both the front unit and body of the scanner have scanning glasses. Be sure to clean both of them. Do not spray water or cleaning solution directly onto the scanning glass.
Removing the Retard Roller 1. Open the roller cover inside the front unit by lifting it at the edge. 2. Raise the roller lock lever ➀, and slide it in the direction of the arrow ➁. 3. Remove the retard roller from its spindle by sliding it to the left.
Reinstalling the Retard Roller 1. Insert the retard roller into the groove inside the roller cover, and align the notch in the roller with the spindle on the front unit. 2. Slide the roller lock lever to the right, and set it into the hollow to the left of the retard roller. 3. Lower the lever to fasten the roller spindle.
4. Close the roller cover. Make sure that the cover clicks into place and is returned to its original position. Removing the Feed Roller 1. Open the roller cover inside the scanner. To open the cover, set your finger in the groove and lift. 2. Raise the roller lock lever ➀, and slide it in the direction of the arrow ➁.
3. Remove the feed roller from its spindle by sliding it to the left. Reinstalling the Feed Roller Set the feed roller into the space inside the roller cover on the scanner, fasten it in place with the lock lever, and close the roller cover. For details, see “Installing the Feed Roller.” (→ P.15) Cleaning the Metal Rollers 1. Turn on the scanner. 2. Open the paper feed tray. 3. While squeezing the OPEN release, open the front unit towards you. 4.
CAUTION ● The front unit and scanner itself contain a metal roller. Be sure to wipe both clean. However, do not spray water or cleaning solution directly onto the rollers. Doing so could damage the scanner’s light source or precision optical components. Also note that because the power is on during this operation, there is a risk of electrical shock if the scanner or your hands are wet. ● Because the power is on when cleaning the metal roller, exercise extreme caution.
Resetting the Counter 1. Open the “Scanner and Camera” folder in the Control Panel. Note ● Windows 95/NT do not display the “Scanner and Camera” folder. ● The displayed dialog box differs depending on Windows you are using. • Windows 98/2000 display the “Scanner and Camera Properties” dialog box. • Windows Me/XP display the “Scanner and Camera” folder. 2. Select [CANON DR-2080C SCSI] (or, [CANON DR-2080C USB]) to display [Properties].
“Scanner and Camera” folder (Windows XP) 3. Double-click the [Counter] tab. 4. Press the [Reset] button and confirm whether the counter is reset to 0.
Troubleshooting This section describes common problems that may occur while you are using the scanner, and how to resolve them. Refer to the troubleshooting section related to the problem that you have encountered. The scanner does not turn on ..................................................... P.64 The PC does not recognize the scanner ..................................... P.65 (connecting via SCSI) The PC does not recognize the scanner ..................................... P.67 (connecting via USB2.
✘ The PC does not recognize the scanner (connecting via SCSI) The following are possible causes of the PC failing to recognize the scanner. Check each possible cause. Cause The scanner is not connected correctly. Action Check all the SCSI cable connections between the scanner, the SCSI board in the PC, and any other SCSI devices connected to the system. Cause The SCSI board is not correctly installed in the PC.
66 Cause The scanner’s SCSI ID is identical to the SCSI ID of another device. Action Check the SCSI IDs of all SCSI devices connected to the system and set a unique SCSI ID for the scanner. Cause The terminator is not set correctly. Action Turn the PC and the scanner off once. Then, turn the scanner on first and the PC on again. (→ P.26) Cause The PC was turned on before the scanner. Action Shut down both the PC and the scanner, and then turn the scanner back on, followed by the PC.
✘ The PC does not recognize the scanner (connecting via USB2.0) The following are possible causes of the PC failing to recognize the scanner. Check each possible cause. Cause The scanner is not connected correctly. Action Check the USB cable connections between the scanner and the PC. (→ P.27) Cause The USB 2.0 interface board is not mounted on the PC correctly. Action Reseat the USB 2.0 interface board on the PC correctly referring to the instruction manual for the USB 2.0 interface board.
✘ Images are not scanned Check the following if the scanner does not scan an image even though the scanning operation is being performed: ● Is the scanner correctly connected to the PC? ● Has the scanner driver been installed? ● Has the application software been installed correctly? Has the application software been set up correctly? ● Is there a problem in the PC system? Notice If the scanner does not respond at all due to a system error, turn the scanner off, wait at least 10 seconds, and then turn the sc
✘ Documents are not ejected properly When you set and scan a multi-page document, individual pages of the document are not fully ejected from the eject rollers. (The trailing edge sticks partway inside the scanner.). Cause This is not a jam. The scanner is designed to stop at a certain point in the eject sequence while waiting to scan the next page of the document. Action You may either pull the partially ejected page out from between the eject rollers, or leave the page as it is and scan the next page.
Cause Attempting to use a function of the DR-2080C that is not supported by the application software. Action Some application software may not support certain functions, such as automatically detecting the paper size or changing the scanning mode/resolution through the scan panel. Using such application software for scanning may yield abnormal scanning results. Try scanning without using functions such as automatic paper size detection or margins settings.
Specifications Type Scanning document size Compact Document Scanner Width: 2.2 in. to 8.5 in. (55 mm to 216 mm) Length: 2.8 in. to 11.7 in. (70 mm to 297 mm) with page separation mode 2.8 in. to 14 in. (70 mm to 355 mm) with bypass mode Thickness: 0.0024 in. to 0.0059 in. (0.06 mm to 0.15 mm) with page separation mode 0.0019 in. to 0.0079 in. (0.05 mm to 0.
Noise Operating environment Not more than 66 dB Temperature: 10 °C to 32.5 °C Humidity: 20% to 80% RH AC adapter Model Input Output Power consumption Weight Model Input Output Power consumption Weight Model Input Output Power consumption Weight MH3-2053 (100-120V Type) 100-120 V AC, 60 Hz, 0.7 A 15 V DC, 2 A Less than 0.5 W (the AC adapter by itself or with the scanner off) Approximately 0.3 kg MH3-2054 (220-240V Type) 200-240 V AC, 50/60 Hz, 0.35 A 15 V DC, 2 A Less than 0.
Index A AC adapter ................................................ 72 C CapturePerfect ................................... 42, 44 Install .................................................... 38 Uninstall ............................................... 39 Cleaning Metal Roller ......................................... 60 Scanner ................................................. 55 Scanning Glass ..................................... 56 Transport Rollers ..................................
CANON ELECTRONICS INC. 1248, SHIMOKAGEMORI, CHICHIBU-SHI, SAITAMA 369-1892, JAPAN CANON U.S.A. INC. ONE CANON PLAZA, LAKE SUCCESS, N.Y.11042, U.S.A. CANON CANADA INC. 6390 DIXIE ROAD, MISSISSAUGA, ONTARIO L5T 1P7, CANADA CANON EUROPA N.V. BOVENKERKERWEG 59-61, P.O.BOX 2262, 1180EG AMSTELVEEN, THE NETHERLANDS CANON LATIN AMERICA, INC. 703 WATERFORD WAY SUITE 400 MIAMI, FLORIDA 33126 U.S.A. CANON AUSTRALIA PTY. LTD. 1 THOMAS HOLT DRIVE, NORTH RYDE, SYDNEY. N.S.W, 2113. AUSTRALIA CANON SINGAPORE PTE. LTD.