User`s guide

Using the Scanner 27
Chapter 2
4. Place the documents face up into the feed tray, so that they touch the stoppers.
IMPORTANT
There is a load limit mark ( ) on the document guides. Do not stack
documents higher than this mark (approximately 50 sheets of 20 lb bond
(80 g/m
2
) paper). Doing so may cause a paper jam.
5. Adjust the document guides so they match the width of the document.
Note
Before starting a scan, make sure that the document is loaded in the scanner
correctly. Scanning a curled document or a creased document can damage the
document.
6. Start scanning from the application.
Stopper