Owner's Manual

14 Before Using the Scanner
1-4 Installation Requirements
To use the DR-4010C scanner, your computer must satisfy the following
system requirements.
• One of the following operating systems:
- Microsoft Windows 2000 Professional SP4 or later
- Microsoft Windows XP Professional SP2 or later
- Microsoft Windows XP Home Edition SP2 or later
- Microsoft Windows XP Professional x64 Edition
• A computer that meets the following specifications:
- CPU: Pentium 4 (3.2 GHz or faster)
- Memory: 1 GB or more
- Hard disk: 1 GB or more available space
- Interface: USB port present as standard equipment on the
computer (Hi-Speed USB 2.0) or SCSI expansion card
- Monitor: Resolution of 1024 × 768 (XGA) or better
recommended.
• When using a SCSI expansion card, select one of the following
recommended models.
SCSI cards made by Adaptec (for PCI bus)
- AHA-2930U
- AHA-2940AU
- ASC-19160
- ASC-29160N
SCSI card made by Adaptec (for Card bus)
- APA-1480
• An ISIS-compatible application or a TWAIN-compatible application
that is compatible with the above operating systems.
IMPORTANT
• If you do not know the requirements for your computer system,
contact the store where you purchased the computer or the
manufacturer of the computer for more information.
• Do not connect both a USB interface and a SCSI card at the same
time.
• Be aware of the following information when using the USB
interface that was provided as standard with your computer.
- The USB interface should be a Hi-Speed USB 2.0 interface.
- Scanning speeds are lower if your computer’s standard USB
interface is USB Full-Speed (equal to USB 1.1.) In this case,
using a SCSI expansion card is recommended.
- Use the latest USB 2.0 driver made available by Microsoft. For
details, consult your local authorized Canon dealer.