Owner's Manual

19
Summary of the Scan menu modes and settings
Number, mode and
Content
default display
01 Front side brightness Selects scanning density for the front side of document pages.
01.F.Br i ghtness
D ––––+ ––––LHost
D4 D3 D2 D1 Norm L1 L2 L3 L4
Host
D means Dark, L means Light.
Pressing
or
with Host displayed, changes the display to Norm.
02 Front side image emphasis Sets emphasis for the front side of document pages.
02.F.Emp
–––+ –
has i s
Hos t
Smooth None Low Medium High
Host
Pressing
or
with Host displayed, changes the display to Medium.
03 Front side contrast Sets the contrast for the front side of document pages.
03.F.Con
L ––––+ ––
trast
––HHost
L4 L3 L2 L1 Norm H1 H2 H3 H4
Host
H means high, L means Low.
Pressing
or
with Host displayed, changes the display to Norm.
04 Front side halftone Sets gradation for the front side of document pages.
04.F.Ha l f t one
Hos t
Host Binary Bayer dither 64 Bayer dither 16
Halftone dot 32 Halftone dot 64 Error diffusion
(Dynamic Th.)
“Dynamic Threshold” does not appear if expansion memory (DIMM) is
not installed. To use “Dynamic Threshold”, contact your service
representative for installation of expansion memory (DIMM).
05 Back side dropout color Set the dropout color for the back side of document pages.
05.F.Color drop
Hos t
Host Red Green
06 Back side brightness Sets the density for the back side of document pages.
06.B.Br i
D ––––+ ––
ghtness
––LHost
D4 D3 D2 D1 Norm L1 L2 L3 L4
Host
D means Dark, L means Light.
Pressing
or
with Host displayed, changes the display to Norm.
07 Back side image emphasis Sets emphasis for the back sides of document pages.
07.B.Emp
–––+ –
has i s
Hos t
Smooth None Low Medium High
Host
Pressing
or
with Host displayed, changes the display to Medium.
Setting up the scanner