Owner's Manual

31
Loading documents in the ADF
Follow this procedure to load documents into the ADF.
1
To prevent double feeding, separate
sheets before you stack them and
load them in the ADF.
Caution! Check the sheets and make sure
all fasteners such as staples, pins, etc.
have been removed.
2
Tap the top edge and left edge of
the stack against a flat surface to
align the sheets.
3
Check the manual feed selector
and make sure that it is set for
AUTO, and set the document guide
slightly larger than the actual size of
the sheets.
Operating the scanner
Align left edge
Align top edge
Manual feed selector
Document guide