Owner's Manual

35
Using the flatbed to scan documents
Use the flatbed to scan documents which cannot be loaded in the ADF, such as pages of open books or
magazines, add size pages, or easily torn documents.
Loading the flatbed
1
Open the document cover.
2
Place the scanning side of the
sheet face down on the document
glass.
If the sheet is bent or creased, flatten it
before you load it.
Place the sheet on the document glass
with the upper left corner of the sheet at
the alignment mark and the short and
long sides arranged as shown in the il-
lustrations.
Check the alignment of the sheet. If it is
not straight, it will not be scanned cor-
rectly.
Operating the scanner
Document cover
Document
Alignment mark
Longer side
Document glass
Document
Alignment mark
Shorter side